Bedienungsanleitung MTD CubCadet serie 2000 (Seite 10 von 18) (Englisch)

507836

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Operating instructions for lawn tractors English

t~êåáåÖ

lÄëÉêîÉ=íÜÉ=çêÇ Éê=áå=ïÜáÅ Ü=íÜÉ=

Ä~ííÉêó=áë=ãçìåíÉÇ= ïÜÉå= ÅçååÉÅíáåÖL

ÇáëÅçååÉÅíáåÖ=íÜÉ=íÉêãáå~äëK

Fitting:



First connect the red cable

(+/positive pole) and then the black

cable (–/negative pole).

Removal:



First disconnect the black cable

(–/negative pole) and then the red

cable (+/positive pole).

Installing the steering

wheel

Fig. 2c



Connect steering wheel (2)

to steering shaft (1).



Place on top the washer (3) with the

convex side up, and secure the

steering wheel with the screw (4).



Insert cover cap (5, depending

on model).

Operation and Display

elements

=t~êåáåÖK=

a~ã~ÖÉ=íç=íÜÉ=~ééäá~åÅÉK

qÜÉ=Åçåíêçä=~åÇ=áåÇáÅ~íçê=ÑìåÅíáçåë=

ïáää=ÄÉ=ÇÉëÅêáÄÉ Ç=íç=ÄÉÖáå=ïáíÜK=

aç åçí=éÉêÑçêã=~åó=ÑìåÅíáçåë=

~í=íÜáë=ëí~ÖÉ>

Fig. 1

A Ignition lock with OCR function

B Forward pedal

C Reverse pedal

D Switch for electric cutter deck

lifter *

E Lever for setting the cutting

height *

F Lever for setting height/depth

of the cutter deck * (only in con-

junction with electric cutter deck

lifter)

G Tank contents display

H Lever for the gear release lock

I Dipstick/Filler inlet for gear oil

J Fuel tank/Filler inlet

KStorage bin

L Can holder

M Adjusting lever for seat

N Steering wheel adjusting lever *

O Brake pedal

P Throttle/Choke

Q Switch for parking brake/

Speed control

RChoke

S Display cluster *

T Steering wheel (not illustrated)

U PTO-switch

( * depending on model)

Ignition lock with

OCR function (A)

Fig. 3

This ignition lock features an OCR

function (= user-controlled mowing

in reverse gear).

Start:

Turn the key to the right until

the engine is running, then release.

The key at (normal) allows

mowing in the drive direction.

OCR position:

Turn key to left of normal position

to reverse mowing position

and press the switch (1).

The indicator light (2) comes on and

indicates to the user that the unit

can now mow in reverse and forward

gear.

Stopping:

Turn the key to the left, to .

Note

Do not use the OCR function unless

absolutely necessary, otherwise work

with the key in the normal position.

The OCR function switches off auto-

matically as soon as the key is turned

to the normal position or the engine

is switched off (stop position or dis-

connection of the engine by the safety

interlock system).

Forward pedal (B)

Fig. 1

The pedal controls the speed

in a forward direction.

Reverse pedal (C)

Fig. 1

The pedal controls the speed

in a reverse direction.

Information on forward/

reverse pedal

The further the pedal is pressed

forwards, the faster the unit moves.

To stop or change direction of travel,

release the appropriate pedal.

Switch for electric cutter

deck lifter (D)

(depending

on model)

Fig. 4

Is used to lift and lower the cutter

deck (only in conjunction with the

lever for setting the height/depth

of the cutter deck).

Lower cutter deck

= press switch

forwards.

Lift cutter deck

= switch backwards.

Note

The cutter deck is only lowered until

the height, preset with the lever for

setting the height/depth of the cutter

deck, is reached.

Lever for setting the cutting

height (E)

(depending on

model)

Fig. 1

Is used to raise and lower the cutter

deck.

Largest cutting height,

cutters

top = lever to “HI/12”.

Smallest cutting height,

cutters

bottom = lever to “LO/1”.

Lever for setting the height/

depth of the cutter deck (F)

(depending on model)

Fig. 4

Is used to preselect the required

height setting of the cutter deck

(only in conjunction with electric

the cutter deck lifter).

Largest cutting height,

cutters

top = lever to “HI/6”.

Smallest cutting height,

cutters

bottom = lever to “LO/1”.

Note

To adjust the cutter deck, first lift

it all the way using the switch for

the electric cutter deck lifter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD CubCadet serie 2000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD CubCadet serie 2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info