Bedienungsanleitung MTD CubCadet serie 2000 (Seite 11 von 18) (Englisch)

507836

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

English Operating instructions for lawn tractors

Tank contents display (G)

Fig. 5

As soon as the fuel level has reached

the area of the inspection window (1),

the fuel should be topped up.

Lever for the gear release

lock (H)

Fig. 6

To push the unit when the engine

is switched off.



Pull out lever and press upwards.

To drive the unit, push lever down

and press in.

The lever is situated on the rear panel

of the machine.

Dipstick/Filler inlet

for gear oil (I)

Fig. 5

For checking the level or adding

gear oil.

Fuel tank/Filler inlet (J)

Fig. 1

Storage bin (K)

Fig. 1

Can holder (L)

Fig. 1

Adjusting lever for seat (M)

Fig. 7

Pull the lever, and adjust the seat.

Steering wheel adjusting

lever (N) (depending

on model)

Fig. 8

This adjusts the position of the stee-

ring wheel.



Press and keep pressed the lever.



Adjusting the steering wheel.



Release the lever. Ensure that the

steering wheel engages correctly.

Brake pedal (O)

Fig. 1

The brake pedal can be used to brake

quickly, to engage and disengage

the locking brake, and to switch OFF

speed control.

Choke (P/R) (depending

on model)

Fig. 9

To start a cold engine, move the

choke forwards to Position (Fig. 9)

or the throttle to position (Fig. 10).

Throttle (P)

Fig. 10

The engine speed can be adjusted

continuously. Fast engine speed =

. Slow engine speed = .

Switch for parking brake/

Speed control (Q)

Fig. 11

This switch has a dual function:

Actuate the parking brake:

Press brake pedal all the way and pull

switch. Release the brake pedal.

Release the parking brake:

Press down the brake pedal fully,

the switch disengages.

Switching on Tempomat :

When driving, press the switch.

The forward speed selected at this

point (but not top speed) is maintai-

ned, and the drive pedal can be

released.

When the accelerator pedal or the

brake pedal is depressed, the cruise

control automatically switches off.

Note

The Tempomat functions for forward

travel only.

Display cluster (S)

(depending on model)

Fig. 12

According to the model, the combi-

nation indicator can consist of the

following elements.

Oil pressure (1):

The indicator light is lit while the

engine is running, immediately

switch off engine and check oil level.

Where necessary, visit a garage.

Brake (2):

Indicator lamp lights up if the brake

pedal is not depressed or the parking

brake is not locked when the engine

starts.

Cutter deck/Accessories (PTO) (3):

Indicator lamp lights up if the cutter

deck/accessories (PTO) is not

switched off when the engine starts.

Battery charge indicator (4):

If the indicator light lights up when

the engine is running, this means that

the battery is not sufficiently charged.

Where necessary, visit a garage.

Operating hour counter (5):

This function shows the operating

hours as full hours and

of an hour

in the display.

Optional functions:

– When the ignition is switched on,

the battery voltage indicator is indi-

cated for a short period and then

the operating hours are indicated.

The operating hours are always

counted except for when the

ignition key is in the “Stop”

position or when it is removed.

– Each time 50 operating hours have

elapsed (according to the model),

the oil change indicator “CHG/OIL”

appears in the display for five

minutes. This message appears

after the next two hours of opera-

tion. See the engine manual for oil

change intervals.

Steering wheel (T)

Fig. 1

PTO-switch (U)

Fig. 13

The PTO switch switches the cutter

deck/accessories on and off via

an electromechanical clutch.

= pull the switch.

OFF

= press the switch.

Note

When the safety lock system has

automatically switched OFF the appli-

ance (e.g. when reversing with acti-

vated cutters), first switch ON and

then OFF the PTO switch to release

the lock on the clutch.

Light (depending on model)

The headlights are on for as long

as the engine is running or the ignition

key is outside the Stop position .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD CubCadet serie 2000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD CubCadet serie 2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info