Bedienungsanleitung MTD CubCadet serie 6000 (Seite 12 von 25) (Englisch)

507839

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

User manual English

Note

When the ignition is switched on, the

battery voltage indicator is indicated

for a short period and then the

operating hours are indicated.

The operating hours are always

counted except for when the ignition

key is in the /0 position or when it

is removed.

Note

Each time 50 operating hours have

elapsed (according to the model),

the oil change indicator ‘CNG / OIL’

appears in the display for five

minutes. This message appears

after the next two hours of

operation. See the engine manual

for oil change intervals.

Engine temperature warning

light (H)

If the indicator light lights up when

the engine is running, switch the

engine off immediately and let it cool

down. Where necessary, visit a

garage.

Revolution counter (J)

shows engine rotation in revolutions

per minute (rev/min). Optimum

revolution – 3400–3600 rev/min.

Note

When operating acessories

connected to the PTO, the indicator

needle should always be in the

green area (K) of the revolution

counter.

Tank stopper (15)

Fig. 2

PTO-switch for reverse

driving (16)

Fig. 2

enables the driver to drive

backwards with the PTO gear

activated. A pilot light is illuminated

in the switch as long as the function

is activated.

Engage / Pilot light

Note

Once activated, the function

remains active until the ignition key is

turned for at least 20 seconds in the

/0 position.

PTO-selector lever (17)

Fig. 8

Switching the power shaft on and

off.

a) Push the lever forwards in order

to activate the middle PTO

(2000 rev/min).

b) Lift the lever backwards in order

to activate the rear PTO

(540 rev/min).

c) Move the lever into the middle

position in order to activate both

PTOs at or backwards until it

engages.

For actuating, first push the lever

slightly to the right and then

forwards or backwards, until it

engages.

Central hydraulics lever (18)

Fig. 9

Serves to lift and lower attachments

to the 3-point attachment device as

well as to the mower movement

between the axles.

a) lowering

b) lifting

Lowest setting = ‘floating setting’

Gear lever (19)

t~êåáåÖK=a~ã~ÖÉ=íç=íÜÉ=

~ééäá~åÅÉK

`Ü~åÖáåÖ=íÜÉ=ëéÉÉÇ=ëÜçìäÇ=çåäó=

í~âÉ=éä~ÅÉ=ïÜÉå=íÜÉ=íÜÉ=~ééäá~åÅÉ=áë=

~í=~=ëí~åÇ>

Fig. 11

The lever serves to select high

speed (H) or low speed (L).

High speed - forwards (H)

Forwards approx. 0–17.7 km/h

Reverse approx. 0–8.9 km/h

Slow speed - forwards (L):

Forwards approx. 0–10.2 km/h

Reverse approx. 0–5.1 km/h

Neutral (N):

Decoupled gear For moving the

appliance when the engine is

switched off.

For actuating, first push the lever

slightly to the right and then

forwards or backwards, until it

engages.

Can holder (20)

Fig. 2

Handle bars (21):

Fig. 2

For making it easier to get on/off the

appliance.

Indicator/Brake lights (22)

Fig. 2

Holder symbol (23)

Fig. 2

Storage area (24)

Fig. 2

12 V connection socket (25)

Fig. 2

It serves for connecting the trailer

illumination.

Seat belt (26)

Fig. 2

Auxiliary hydraulics lever (27) -

optional

Fig. 12

For controlling the movement of the

accessories connected via the

auxilliary hydraulics of the appliance.

1. Lift the lever backwards in order

to raise the front or the lifting

accessory / attachment.

2. Lift the lever forward in order to

lower the lifting accessory /

attachment.

3. In order to bring the front lifting/

mounting appliance into the

‘floating setting’ push the lever

fully forwards until it engages.

4. Push the lever to the right, in

order to angle the attachment to

the right or to empty the shovel.

5. Push the lever to the left, in order

to angle the attachment to the left

or to prop up the shovel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD CubCadet serie 6000 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD CubCadet serie 6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info