Bedienungsanleitung Multiplex PROFIcar4000 (Seite 7 von 16) (Englisch)

30242

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

PROFI mc 4000PROFI mc 4000

Version 2.0

value is +30% (with the exception of collective pitch

trim for helicopters).

'' TIP:

If you reverse a transmitter control, you must also

reverse the direction of the trim. Open the trim travel

adjust field and reverse the direction of effect by

pressing the y button. You will see that the prefix

symbol for trim travel changes.

„-10%“ means that the trim has been reversed.

5. Second independent

memory block (optional)

This is how it used to work:

The PROFI mc 4000’s model memory could store

data for 25 to 100 models depending on their com-

plexity. Many users exhausted even this capacity and

were obliged to store settings for rarely used models

on their PC. This is a good idea in any case, as it al-

lows the experimentally minded modeller to fall back

on the „last properly working version“ of a particular

model when a new variant turns out to be a bad

choice.

This is how it works now:

If you have this option installed in your transmitter,

two independent model memory blocks of equal size

are available to you. Memory capacity now rises to

50 to 200 models.

This is how it’s done:

You select which of the two memory ranges you wish

to use in Power-on menu 3.

Assuming that the memory expansion module has

been installed in your transmitter, this is the proce-

dure:

• Switch the transmitter on with

the k button pressed in

• Press the q button twice

This menu should now appear:

Power-ON menu 3

--------------------

;TEXT=Aa BEEP=OFFÄ

MODUL=2_

If the bottom line does not appear on your screen,

then the second memory module is not present.

• Open the select field with the w button.

• Select the module you wish to use with the q/n

buttons or the Digi-adjustor.

• Press k, k to return to the operating screen. The

selected module is now active.

'' TIP:

Don’t be alarmed if your transmitter now switches it-

self off briefly. Switching to the other memory module

initiates a complete „re-boot“ (re-start). This includes

saving the data, so you will also see the message

„Saving data!“ on the screen.

Interrogating the active memory module:

If you want to know which module is currently active

in your transmitter, simply move to the Memory

menu. From the operating screen you reach this with

w w. The top line of the screen displays the number

of the currently active memory module.

Memory 1 88% free

--------------------

;NAME COPYÄ

,TRIMCHECK CHANGE_

6.1 SLOW for mixer inputs

(formerly SOFT-SW)

This is how it used to work:

Mixer inputs could be switched „gradually“, but the de-

lay time was only effective during the switching proc-

ess itself. If you only switched on the input in question

once, then the set delay had no effect, i.e. the trans-

mitter control signal was passed to the servo without

any delay.

This is how it works now:

This facility has been expanded into a genuine

SERVO SLOW function. The actual switching process

still works „SLOWly“, but the function’s response to

commands from the associated transmitter control is

also affected, and works at the SLOW rate which you

have set.

In the new software the SLOW time you have set al-

ways applies, i.e. the response to the transmitter con-

trol is delayed when switching on, switching off and

when the transmitter control is operated. It is in fact a

proper SERVO-SLOW function. The set delay time

therefore only affects the selected mixer input on the

selected servo.

This new method of operation clearly required a new

designation, and that is why we have changed the

menu point’s label from Soft-SW to SLOW.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex PROFIcar4000 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info