Bedienungsanleitung Multiplex ROYALevo12 (Seite 38 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Instructions

Page 93

tion. The corresponding channel number is dis-

played (e.g. K3 for aileron).

Check the movement directions for all control sur-

faces. Wrong directions can be reversed by press-

ing REV/CLR (# or ').

Attention: Quick-Select is not possible, if the

ROYALevo is switched on with “No RF”.

Repeat steps 4. and 5. until all desired channels are as-

signed. Now you can return to the status display and

start the training.

Be careful when assigning throttle if your engine

is running or the model is electrically powered!

Make sure not to endanger other modellers, spectators

or models by your engine bursting into life.

13.4.3. The ROYALevo as pupils transmitter

Important:

If the ROYALevo works as pupils transmitter,

the trims are not operative (the teacher will trim the

model).

The following transmitters can be used as “Teacher”:

ROYALevo, Commander mc, PiCOline,

PROFI mc 3010/3030/4000

Some older MULTIPLEX transmitters can also be used as

teacher transmitter. If your teacher transmitter is not

mentioned above, please ask our after sales service.

1. Select the sub-menu training.

2. Select

Mode = Pupil M, if the teacher transmitter needs

signals in MULTIPLEX format.

Servo centre = 1,6 ms

Mode = Pupil U, if the teacher transmitter needs

signals in UNIVERSAL format.

Servo centre = 1,5 ms

NOTE:

If the ROYALevo is switched OFF without setting the

training mode to OFF, it will directly go to the Training

menu when you switch ON for the next time (safety).

13.5. Sub-menu “User”

13.5.1. Parameter „PIN“

ü global effect

The PIN can be used to protect the settings stored in

your transmitter. If the PIN is activated, the operator can

view the set values, but not change them.

PIN=0000

If you enter this PIN, the values in the transmitter are

not protected against changes.

PIN = **** (four digits)

The PIN must contain at least one digit which

is not „0“!

If you enter a PIN, the lock takes effect next time you

switch the transmitter on. You can leaf through all the

menus, but as soon as you attempt to change a setting,

the following message appears:

If you enter the PIN correctly, the block is lifted. It is only

activated again when you next switch the transmitter

on.

13.5.2. Parameter „Language“

ü global effect

As standard the ROYALevo contains two language sets

for use in display texts. The default for the primary lan-

guage is ENGLISH, and this is selected as active lan-

guage.

The second default language is GERMAN.

In the menu L, USER you can invoke the LANGUAGE

parameter to select either of these two languages.

On the Internet (http://www.multiplex-rc.de/ you will

find a link to the page ROYALevo INFO. On this page we

will make alternative language sets available for you to

download. These files can be installed in the transmitter

using the ROYALevo PC program, and take their place as

the second language.

13.5.3. Parameter „Name“

ü global effect

If your transmitter is new, you will find the name MUL-

TIPLEX in this field. You can enter your own name of up

to 16 characters. Your name then appears in status dis-

play 1 (è 9.2.).

14. Main menu „Controls“ H

By transmitter control we mean all the physical control

elements on the transmitter which are assigned to a

model function. These may include sticks, sliders and

switches. For instance, if you assign a switch for operat-

ing the tow-release, this constitutes a transmitter con-

trol. Which transmitter controls are present, and which

elements are to be used to operate them, is determined

in the menu L -Assignment, Controls.

The Assignment Controls menu is dynamic, i.e. it dis-

plays only those controls which are used in the active

model. If you are operating a simple model which only

features rudder and elevator controls, the menu will

look like this:

Section 14.2. informs you first which programmable

characteristics (parameters) are possible for the individ-

ual transmitter controls. Paragraphs 14.2.1. to 14.2.10.

describe the individual parameters in detail.

14.1. Sub-menu „Control switch“

I Affects active model only

Range -100% to 100%

Default 0% (control centre)

always appears at the end of the controls list

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info