Bedienungsanleitung NAD M17 AV (Seite 15 von 38) (Englisch)

562261

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

SETUP MENU

The Setup Menu allows one to customize the operation of the M17 to the

ancillary equipment used in one’s specic AV system. Unless your system

exactly matches the factory defaults as shown in the accompanying Quick

Setup Guide, you will need to use the setup menu to congure the inputs

of the M17.

At Setup Menu, the following are congurable – Control Setup, Source

Setup, Speaker Setup, Zone Setup, Trigger Setup, Listening Mode Setup,

Display Setup and A/V Presets.

To access and navigate through Setup Menu and its sub-menu selections,

please follow the directions stated in the sections “DISPLAY THE OSD” and

“NAVIGATING THE OSD AND MAKING CHANGES”.

CONTROL SETUP

The M17 supports HDMI Control (CEC) and Audio Return Channel (ARC)

functions. Both functions are possible if external devices that also support

both features are interconnected with the M17 via HDMI connection.

AUTO STANDBY

On: M17 will go to standby mode automatically if there is no user

interface interaction within 30 minutes.

O: M17 remains active even if there is no user interface interaction is

detected.

ETHERNET/CEC IN STANDBY

O : M17 will not pass through any CEC message. Audio and video will not

be streamed from a CEC-enabled HDMI source to a CEC-enabled TV (with

both devices connected via M17). CEC feature is eectively defeated.

On: Enable HDMI Control (CEC) feature. Audio and video will continuously

stream from a CEC-enabled HDMI source to a CEC-enabled TV (with both

devices connected via M17).

Ethernet connection is established when the NAD AVR Remote App is

activated and connected to the same network as the M17. Under this

condition, “Ethernet/CEC in Standby” will automatically turn from “O”

to “On”, will remain “On” and cannot be changed from “On” to “O”. The

On/O options of “Ethernet/CEC in Standby” can be selectable again by

deactivating or disconnecting the NAD AVR Remote App from the network.

HDMI CONTROL CEC

Consumer Electronics Control (CEC) is a set of commands that utilizes

HDMI’s two- way communication to allow for single remote control of any

CEC-enabled devices connected with HDMI. A CEC command will trigger

the necessary commands over HDMI for an entire system to auto-congure

itself to respond to the command.

When devices that support HDMI Control (CEC) are connected, the

following modes of operation can be executed via the M17 or the external

device using any of the device’s remote control.

O: Applies to all CEC options below. At “O” setting, particular CEC feature

is defeated.

Power: At “On” setting, the M17 will automatically go to standby mode

if it receives a CEC standby command. On the other hand, if the M17

receives a CEC power up command, the M17 will correspondingly

switch ON from standby mode.

Source Switch: At “On” setting, the M17 will automatically switch

sources if another CEC device requests a Source change.

For example, if PLAY is pressed on a BD Player with CEC, the M17 and TV

with CEC will automatically switch to their respective input connections

- the M17 switching to the HDMI input where the BD Player is

connected while the TV will switch to its input where the M17’s HDMI

MONITOR OUT is connected. This completes the auto-conguration -

the BD Player is automatically played back using the M17 and TV.

Audio System: At “On” setting, the M17 will broadcast a CEC message

indicating it is an active audio system. A CEC compatible TV will usually

mute its audio output when this happens. When this option is enabled,

the M17 will also respond to CEC volume and mute commands. For

example, a CEC TV may forward the volume commands from its remote

to the M17.

ARC Mode: Audio Return Channel (ARC) enables an ARC-enabled TV

to send audio data “upstream” to M17.

This option has three choices: O, Auto or Source Setup.

Auto: When set to Auto, the M17 will automatically attempt an ARC

audio connection to the TV whenever the TV announces over CEC

that it has become the active source. If an ARC connection can be

established, the M17 will output the ARC audio signal no matter

what source is selected on the M17. The Auto option tends to work

best when all your devices support CEC and the Source Switch

option is set to On.

Source Setup: When set to Source Setup, you can select “ARC” for

the digital audio input in the source setup screen. When you select

a source on the M17 which is set for ARC, the M17 will attempt to

initiate an ARC connection with the TV. When using this option,

you would probably also want to make sure Source Switch is o

otherwise other CEC devices may keep changing the M17 source

when you want it to remain on the ARC source.

IMPORTANT NOTES

• “Audio System” must be set to “On” for “ARC mode” to manifest as an

option.

• Audio and video will continuously stream from the HDMI source with

CEC to the TV with CEC even if the M17 is at standby mode.

OPERATION

USING THE M17  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 AV Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 AV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info