Bedienungsanleitung NAD M17 AV (Seite 16 von 38) (Englisch)

562261

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

SOURCE SETUP

There are two sub-menu items under Source Setup. These are Source

Setup (Normal View) and Source Setup (Table View).

SOURCE SETUP (NORMAL VIEW)

The Source Setup (Normal View) menu makes it possible to set, allocate or

change the following settings.

SOURCE

All available Sources are congurable. A particular Source can be enabled

or disabled, renamed, assigned analog and digital audio sources, video

sources, A/V Presets, Trigger settings among other settings.

These settings can be implemented through the following parameters.

ENABLED

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel display options, bypassing unused sources.

Select “Yes” to enable the particular Source or “No” to disable the Source.

NAME

A new Name maybe assigned to a Source label. For example, if your BD

player is attached to “Source 1”, it is possible to rename “Source 1” to “BD”.

In order to rename the Source label, scroll to the “Name” parameter. Press

[E] to go to the rst character. Then, press [R/T] to pick through the

alphanumeric selections.

Press [E] to move to the next character and at the same time save the

changes done on the current character. The name can be as long as twelve

characters.

The new Name will be shown in the VFD as well as on the OSD.

ANALOG AUDIO

All available analog audio input can be variably assigned to any of the

Sources.

Scroll to “Analog Audio”, press [E] and then [R/T] to select and assign an

analog audio input to the particular Source. There are two choices - Audio

or O.

When “Audio” is chosen, press [E] and then [R/T] to select and assign the

desired audio input -1 to 7.

If “O” is selected, no incoming analog audio signal is selected by the

particular Source. Note that when “Analog Audio” is set to “O”, “Gain” will

not be enabled as an option.

NOTE

An incoming digital signal present at the assigned digital input will

always take precedence over the assigned analog audio input, even if

both are present. To maintain the analog audio input for the particular

Source, select “O” at the “Digital Audio” setting of the same “Source”

menu.

GAIN

Gain adjustment allows all sources to play back at the same volume level so

you don’t need to adjust the volume every time a new source is selected. It

is generally preferable to reduce the level of the loudest source rather than

making louder the softer sources.

Scroll to “Gain”, press [E] and then [R/T] to step through the desired level

from -12dB to 12dB.

Note that when “Analog Audio” is set to “O”, “Gain” will not be enabled as

an option.

OPERATION

USING THE M17  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 AV Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 AV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info