28 - English
English
Setting the temperature control
6.2 CH menu
The CH menu appears on the display when you
simultaneously press the keys MENU and CH.With the
CH menu you can select the kind of temperature regulation and
set all accompanying features.
1. First press:
2.
Press and hold
the key
and subsequently
press the
key
(release the key
)
key
display
75 desired CH water temperature
80 measured CH water temperature
-2.5 measured outside temperature
(these figures are examples)
For RR, only the measured CH water temperature
will be shown.
ECO temperature
The lowest temperature which can be used in a
clock program. Standard, the ECO temperature is
set to 16 °C.
Advanced heat-up (yes = 1, no = 0)
(only for RR and WD + RTC)
If the advanced heat-up is set to off, the boiler
starts heating at the moment when the clock
program switches over from a low temperature
setting to a higher temperature setting.
If the advanced heat-up is set to on, the
thermostat takes care that the boiler starts
heating earlier, so that the desired temperature is
reached at the switching point of the thermostat.
The thermostat learns in the long term how
much earlier the boiler must start heating.
Standard, the advanced heat-up is set to on
(yes = 1).
Kind of temperature regulation
The kind of temperature regulation which is
selected.
The set regulation can be recognised by the
symbol on the display: