34 - English
English
Configuration and calibration of the IRT 30 thermostat
You can adapt the heat-up speed as follows:
1. Simultaneously press the MENU, INSERT and REMOVE key.
PID appears on the display.
2. Hold the INSERT key and release the other keys.
3. Turn the program knob, while holding the INSERT key, until
the desired PID number appears in the display.
4. Release the INSERT key.
2. Adjust the clock speed.
The IRT 30 thermostat has a internal clock.This clock can lose or
gain some time in the long term. You can adjust the speed of the
clock.When you enter a correction of ‘+1’, the clock will run
1 minute per year faster.
You can adjust the clock as follows:
1. Simultaneously press the MENU, INSERT and REMOVE key,
and release them.
2. Press an hold the INSERT key again. On the display, ëcorrí
appears.
3. Turn the program knob, while holding the INSERT key, until
the desired clock correction appears.
4. Release the INSERT key.
3. Switching the slow temperature rise on or off.
If you have a boiler with a high capacity, this can cause the CH
water to heat up too fast.This can result in a ticking sound in the
tubes.To prevent this, you can set the slow temperature rise to on.
