Bedienungsanleitung Olivetti ECR5200 (Seite 21 von 65) (Englisch)

16646

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Programming the Euro as the Cash Register's Base

Currency

By default the cash register is programmed to work with your currency

as the base currency. If you wish to perform sales transactions in Euro,

you need to reprogram the cash register's base currency. Proceed as

follows to do so:

1. Open the printer compartment and slide the control switch to the PRG

position.

2. Type [14] followed by [1] and then press the [RA/

] key.

3. Slide the control switch to either the R1 or R2 position and then refit,

close and lock the printer compartment cover.

Helpful Hints for a Successful Start-Up

This cash register has up to 12 departments available. You may assign

the taxable status to any other department by repeating the tax assignment

procedure used for Department 1. For departments 7-12, press the [Dept

Shift] key before the applicable department key. For example, to select

Department 10 press [Dept Shift] followed by the [Department 4/10]

key.

It is not necessary to re-program the entire machine to make a single

program change or correction. If you wish to make a change, such as an

update on a VAT rate, be sure that you are in the program mode, then re-

do the program in question. A new program entry will automatically

override a previous entry.

Remember that you enter into the program mode by moving the control

switch to the PRG position.

Be sure to slide the control switch to the OFF position at the end of a

business day.

In order to ensure continuous battery back-up protection, it is important

that the batteries be changed at least once every year.

Cash Register Programming

This cash register can be programmed to tailor its features according to

your specific needs. This programming facility allows you to:

• Define three-digit secret codes for each of the 6 programmable clerks

• Set the date and time

• Set percent discount (-%) rates

• Define decimal point positions

• Define up to four VAT rates

• Define a department tax status

• Define Price Look-Ups (PLUs) for individual items

• Set an exchange rate for the Euro

• Program the different system options available

• Define a calculator mode password

• Define a manager password for the PRG and Z modes.

Set some of or all of the above features, depending on your business

needs. These program settings will reside in the cash register's memory

until you change them or deactivate the battery back-up system.

Setting Cash Register Features

All cash register features are programmed by first switching the

cash register into the program (PRG) mode by using the control

switch located in the printer compartment.

This chapter provides simple step-by-step procedures on how to program

the cash register. An example is provided after each procedure. It is

suggested that you first run through all the examples to become familiar

with the cash register's programming facilities, then program the cash

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR5200 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR5200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info