Bedienungsanleitung Panasonic SCALL30TEG (Seite 26 von 40) (Englisch)

612774

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SQT0936

∫ Operation with this system

Preparation

≥ Turn this system and SC-ALL2 on.

1 Press [SETUP] on the remote control

repeatedly to select “REAR PAIRING”.

2Press [4][3] on the remote control to

select “YES” and then press [OK].

≥

This system enters the pairing mode and “REAR1

PAIRING” is displayed on the display of the main unit.

3 Start the pairing mode on SC-ALL2.

≥ Refer to the operating instructions for SC-ALL2.

≥ When pairing with the first speaker finishes, pairing

starts with the second speaker and “REAR2

PAIRING” is displayed on the display of the main

unit.

≥ Make the left and right surround speaker settings on

SC-ALL2.

When pairing with both speakers finishes,

“PAIRED” is displayed on the display of the

main unit.

≥ When pairing is successful, “REAR SPEAKER”

(> 24) comes “ON” automatically and the output

setting changes to 4.1 ch.

≥ If you try to set left and right surround speakers to

the same channel on SC-ALL2, pairing fails and

“NOT COMPLETED” is displayed on the display of

the main unit. Repeat the procedure from the

beginning if this occurs.



≥ The pairing mode is cancelled after about 120 seconds

elapses. You can also press [Í/I] to cancel it.

≥ You cannot cancel pairing on this system. Cancel pairing

on SC-ALL2.

≥ The power on paired SC-ALL2 is linked to this system.

– They remain linked even when the “REAR SPEAKER”

(> 24) is “OFF”.

≥ There is no way of adjusting delay time with this system.

≥ If one of the speakers fails to pair, repeat the procedure

from the beginning. When you do so, “REAR PAIRING” is

displayed during pairing and “PAIRED” is displayed when

pairing is successful.

≥ You can adjust the output level of the rear surround

speakers. (> 24, “REAR LEVEL”)

Linked operations

with the TV

(VIERA Link “HDAVI

Control

”)

Preparation

1 Confirm that the HDMI connection has been

made. (> 8, 9)

2 Set the “HDAVI Control” operations on the

connected equipment (e.g., TV).

3 For the optimal “HDAVI Control” operations

change the following settings on the

connected TV

§1

≥ Set the default speaker settings to this system.

§2

≥ Set the speaker selection settings to this system.

4 Turn on all “HDAVI Control” compatible

equipment and select the TV’s input for this

system so that the “HDAVI Control” function

works properly.

5 If a device is connected to the HDMI AV IN

terminal, start play to check that the picture

is displayed on the TV correctly.

When the connection or settings are

changed, repeat this procedure.

§1 The availability and function of the settings may vary

depending on the TV. Refer to the operating

instructions for the TV for details.

§2 If the TV has a default speaker setting within the VIERA

Link setting items, choosing this system as the default

speaker will automatically change the speaker selection

to this system.

What is VIERA Link “HDAVI Control”?

VIERA Link “HDAVI Control” is a convenient

function that offers linked operations of this

system, and a Panasonic TV (VIERA) under

“HDAVI Control”.

You can use this function by connecting the

equipment with an HDMI cable. See the

operating instructions for connected

equipment for operational details.

SC-ALL30T-SQT0936.book 26 ページ２０１５年４月２８日　火曜日　午前１０時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCALL30TEG Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCALL30TEG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info