Bedienungsanleitung Panasonic SCALL30TEG (Seite 28 von 40) (Englisch)

612774

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SQT0936

Reference

Troubleshooting

Before requesting service, make the following

checks. If you are in doubt about some of the

check points, or if the solutions indicated in the

following guide do not solve the problem,

consult your dealer for instructions.

No power.

≥ Unplug the AC mains lead for 10 sec before

plug in again.

≥ After turning the main unit on, if the main unit

immediately turns off, unplug the AC mains

lead and consult your dealer.

≥ If the main unit does not turn on by turning on

TV (HDAVI control), turn on the main unit

manually.

If the problem persists, refer to “HDMI” in

“Troubleshooting”.

The remote control does not work properly.

≥ The battery is depleted. Replace it with a new

one. (> 7)

≥ It is possible that the insulation sheet has not

been removed. Remove the insulation sheet.

(> 7)

≥ It may be necessary to set the code of the

remote control again after changing the

battery of the remote control. (> 16)

≥ Use the remote control within the correct

operation range. (> 7)

The main unit is automatically switched to

standby mode.

“AUTO POWER DOWN” function is on.

The main unit will automatically switch to

standby mode when no signal is input and no

operation is performed for approx. 20 minutes.

Refer to page 23 to turn this function off.

The main unit is turned off when the TV’s

speakers are selected in the speaker control.

This is a normal feature when using VIERA Link

(HDAVI Control 4 or later). Please read the

operating instructions for the TV for details

about its power save feature. (> 26)

The switches on the main unit do not work.

[Í/I], [VOL j], [VOL i], [INPUT], and

[ -PAIRING] on the main unit are touch keys.

Touch the switches with your finger. They may

not work if operated with your fingernails or

hands wearing gloves.

Colour irregularities on a CRT TV.

If colour irregularities appear on the TV, turn off

the TV for about 30 minutes and move the TV

away from this unit slightly. If this does not fix

the problem, move this unit away from the TV.

This system does not operate correctly.

If the HDMI cable is connected to the wrong

terminal (HDMI AV IN or HDMI AV OUT), this

system will not operate correctly. Turn the main

unit off, disconnect the AC mains lead and

reconnect the HDMI cable(s). (> 8, 9)

VIERA Link related operations no longer

function properly.

≥ Check the VIERA Link setting on the

connected devices.

jTurn on VIERA Link function on the

connected devices.

jSelect this system as the speaker in the

TV's VIERA Link menu.

≥ Have you turned the VIERA Link settings off?

(> 23)

If this system does not operate as

expected, returning the settings to the

factory preset may solve the problem.

To return to the factory preset.

1 While the main unit is on, touch and hold

[Í/I] on the main unit until “PLEASE

WAIT” is indicated on the display.

(“RESET” is indicated on the display

when this system is reset.)

2 Turn the unit off, then turn it on again.

≥ The remote control code will return to

“REMOTE 1” when this system is returned

to the factory preset. To change the remote

control code, refer to “Remote control

code” (> 16).

General operation

HDMI

SC-ALL30T-SQT0936.book 28 ページ２０１５年４月２８日　火曜日　午前１０時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCALL30TEG Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCALL30TEG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info