Bedienungsanleitung Parkside PDFW 120 A2 - IAN 353549 (Seite 11 von 65) (Englisch)

762964

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

PDFW 120 A2 GB│IE│NI│CY │ 7 ■

■ Replace damaged or heavily furrowed grinding

discs.

■ When transporting the bench grinder, lift it by

the housing or the two protective covers.

■ Adjust the tool rests so that the angle between

the tool rest and the accessory tool is always

greater than 85°.

Safety instructions for

all applications

General safety instructions for grinding, sand-

paper sanding, working with wire brushes,

polishing, milling and abrasive cutting

a) This power tool is intended for use as a

grinder, sandpaper sander, wire brush,

polisher, milling machine and abrasive cutting

appliance. Please follow all safety instruc-

tions, instructions, diagrams and data that

you receive with the appliance. If you do not

observe the following instructions, this can lead

to an electrical shock, ﬁre and/or serious

injuries.

b) Do not use any accessories that have not

been provided or recommended by the manu-

facturer for this power tool. Just because you

can attach the accessories to your power tool,

does not guarantee they are safe to use.

c) The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accessories

that rotate faster than the permissible rate can

break and throw pieces into the air.

d) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of the power tool. Incorrectly

dimensioned accessory tools cannot be suﬃ-

ciently shielded or controlled.

e) Grinding discs, sanding drums or other

accessories must match the grinding spindle

or collet chuck of your power tool exactly.

Accessory tools which do not ﬁt precisely into

the take-up of the power tool will rotate

unevenly, vibrate severely and can lead to a

loss of control.

f) Discs, grinding cylinders, cutting tools or

other accessories mounted on a mandrel must

be completely inserted in the collet or chuck.

Any “protrusion” or exposed parts of the

mandrel between the grinding tool and the

collet or chuck must be kept to a minimum.

If the mandrel is not suﬃciently tightened or the

grinding tool protrudes too far, the tool could

come loose and been thrown out at high speed.

g) Never use damaged accessory tools. Before

each use, check accessory tools such as

grinding discs for chips or cracks, sanding

drums for cracks, wearing or excessive wear

and tear and wire brushes for loose or broken

wires. If the power tool or the accessory tool

in use is dropped, check to see if it is

damaged or use an undamaged accessory

tool. When you have checked and inserted

the accessory tool, ensure that you and any

other people in the vicinity remain outside of

the range of the rotating accessory tool and

allow the tool to rotate at maximum speed for

one minute. Damaged accessory tools usually

break during this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection or

goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. The eyes should be protected from

ﬂying debris that may be caused during certain

applications. Dust or ﬁlter masks must be used

to ﬁlter any dust created by the application. If

you are exposed to loud noise for any length

of time, you may suﬀer hearing loss.

i) Ensure that other people remain at a safe

distance to your workspace. Anyone who

enters the workspace must wear personal

protective equipment. Fragments of the work-

piece or broken accessory tools can ﬂy oﬀ

and cause injury – even outside the immediate

working area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDFW 120 A2 - IAN 353549 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDFW 120 A2 - IAN 353549

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info