Bedienungsanleitung Parkside PDFW 120 A2 - IAN 353549 (Seite 12 von 65) (Englisch)

762964

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

PDFW 120 A2

■ 8 │ GB│IE│NI│CY

j) Hold the power tool only by the insulated

gripping surfaces when performing an opera-

tion where the accessory tool may contact

hidden wiring or its own cord. Contact with a

live cable may also cause metal parts of the

appliance to become live and may result in an

electric shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the

motor can cause the power tool to twist.

l) If possible, use clamps to hold the workpiece

in position. Never hold a small workpiece in

one hand and the power tool in the other

while you are using it. By clamping small work-

pieces, you keep both hands free for better

control of the power tool. When cutting round

workpieces such as dowels, rods or pipes, be

aware that these can roll away and this can

cause the tool to jam and be thrown towards

you.

m) Hold the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get cut or caught and your

hand or arm could get caught in the rotating

accessory tool.

n) Never put the power tool down until the

accessory tool has come to a complete stand-

still. The rotating accessory tool could come

into contact with the surface and cause you to

lose control of the power tool.

o) When changing accessory tools or changing

settings, tighten the collet nut, the chuck or

other ﬁxing elements tightly. Loose fastening

elements can shift unexpectedly and lead to

loss of control; unsecured, rotating components

will ﬂy oﬀ violently.

p) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to a physical injury.

q) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

Do not use the power tool in the vicinity of ﬂam-

mable materials. Sparks can ignite such materials.

s) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to an electric shock.

Additional safety instructions

forallapplications

Kickback and corresponding safety

instructions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, abrasive

band, wire brush, etc. catches or jams. Catching

or jamming leads to an abrupt stop of the rotating

accessory tool. If this happens, an uncontrolled

power tool will turn rapidly against the direction

of rotation of the accessory tool.

If, for example, a grinding disc catches or jams, the

edge of the grinding disc that is projecting into the

workpiece can get caught and break oﬀ the grind-

ing disc or cause a kickback. The grinding disc can

then ﬂy in the direction of the operator or away

from him, depending on the direction of rotation of

the disc at the blockage. This can also break grind-

ing discs.

A kickback is caused by incorrect use or misuse

of the power tool. This can be avoided by taking

proper precautions as described below.

a) Hold the power tool ﬁrmly in both hands and

position your body and arms so they can

absorb the force of a kickback. By taking

adequate precautions, the operator can stay in

control of the kickback forces.

b) Take special care when working around

corners, sharp edges, etc. Avoid allowing the

accessory tool to bounce back from the work-

piece or jam in the workpiece. The rotating

accessory tool is more likely to jam in corners or

sharp edges or if it rebounds oﬀ them. This can

cause a loss of control or kickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDFW 120 A2 - IAN 353549 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDFW 120 A2 - IAN 353549

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info