Bedienungsanleitung Parkside PDFW 120 A2 - IAN 353549 (Seite 15 von 65) (Englisch)

762964

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

PDFW 120 A2 GB│IE│NI│CY │ 11 ■

■Use an extension cord for outdoor use! Use

only suitably certiﬁed and labelled extension

cords outdoors.

■Remain alert at all times! Pay attention to what

you are doing. Proceed with caution when

working with the tool. Do not use the power tool

when distracted.

■Check the power tool for any damage! Before

continuing to use the power tool, check all safety

devices and any slightly damaged parts to make

sure they function properly and as intended.

■ Check that all moving parts work properly with-

out jamming and whether parts are damaged.

All parts must be properly ﬁtted and meet all

the conditions to ensure the proper operation of

the power tool. Damaged safety devices and

parts must be properly repaired or replaced

by a specialist workshop unless otherwise indi-

cated in the instructions.

■ Damaged switches must be replaced at an

authorised customer service centre.

■ Do not use any power tools that you cannot

switch on and oﬀ with the power switch.

CAUTION! The use of other tools and accesso-

ries could lead to an increased risk of personal

injury for you.

■Have your power tool repaired by a qualiﬁed

electrician! This power tool complies with all

relevant safety regulations. Repairs may only

be performed by a qualiﬁed electrician using

original spare parts; otherwise this could lead

to accidents for the user.

Appliance-speciﬁc safety instructions

WARNING!

► Do not use damaged or deformed discs or

brushes.

■ Use only grinding discs and brushes whose

imprinted speed rating is at least as high as that

on the type plate on the power tool.

■ Adjust the spark deﬂector occasionally to com-

pensate for wear on the disc. Ensure that the

distance between the spark deﬂector and the

disc is a small as possible and is never more

than 2 mm.

■ Always leave the tool attached to the spindle

to reduce the risk of contact with the rotating

spindle.

Residual risks!

Even if you operate this power tool properly, there

will still be residual risks. The following risks can

occur in the context of the design and construction

of this power tool:

a) Lung damage, if no suitable breathing protection

is worn.

b) Hearing damage, if no suitable hearing protec-

tion is worn.

c) Damage to health caused by vibrations if the

appliance is used for extended periods or is not

properly used and maintained.

WARNING!

► The power tool creates an electromagnetic

ﬁeld during operation. This ﬁeld can, in certain

circumstances, impair active or passive medical

implants. To reduce the risk of fatal injuries, we

recommend that people with medical implants

consult their doctor and the manufacturer of

the medical implant before operating this

machine.

Before use

NOTE

► Please note that you must always ﬁt

-- the tool rests ,

-- the spark deﬂectors ,

-- and the eye shields

as required for the grinding or buﬃng

disc .

► Please note that you will require tools which

are not included in delivery for the assembly.

Fitting the tool rests

Fit the tool rests onto the device using the

supplied knurled screws (See ﬁg. B):

♦ Hold the relevant nut into the appropriate recess

with a ﬁnger.

♦ Now use the knurled screw to attach the

workpiece rest ﬁrmly onto the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDFW 120 A2 - IAN 353549 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDFW 120 A2 - IAN 353549

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info