Bedienungsanleitung Pro-form 500 CX - PETL41106 (Seite 14 von 36) (Englisch)

553943

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

OW TO USE A PRESET PROGRAM

nsert the key into the console.

ee HOW TO TURN ON THE POWER on page

12.

elect one of the preset programs.

To select a preset program, press one of the

twelve preset program buttons; “P1,” “P2,” “P3,”

“P4,” “P5,” “P6,” “P7,” “P8,” “P9,” “P10,” “P11,” or

“P12” will appear in the priority display for a few

seconds.

A few seconds after a preset program is selected,

the maximum incline setting of the program and

the maximum speed setting of the program will

flash in the display for a few seconds. The display

will also show how long the program will last. In

addition, a profile of the speed settings of the pro-

gram will scroll across the matrix.

Press the Start button or the Speed increase

button to start the program.

A moment after you press the button, the treadmill

will automatically adjust to the first speed and in-

cline settings of the program. Hold the handrails

and begin walking.

Each program is divided into 30 one-minute seg-

ments.

One speed setting and one incline setting

are programmed for each segment. Note: The

same speed setting and/or incline setting may be

programmed for two or more consecutive seg-

ments.

The speed setting for

the first segment will

be shown in the flash-

ing Current Segment

column of the matrix.

(The incline settings

are not shown in the

matrix.) The speed

settings for the next several segments will be

shown in the columns to the right.

When only three seconds remain in the first seg-

ent of the program, both the Current Segment

column and the column to the right will flash and a

series of tones will sound. If the speed and/or in-

cline of the treadmill is about to change, the speed

setting and/or the incline setting will flash in the

display to alert you.

When the first segment is completed,

all speed

settings will move one column to the left

. The

speed setting for the second segment will then be

shown in the flashing Current Segment column,

and the treadmill will automatically adjust to the

speed and incline settings for the second seg-

ment. Note: If all seven of the indicators in the

Current Segment column are lit,

the speed settings

may move downward

so that only the highest indi-

cators appear in the matrix.

The program will continue in this way until the

speed setting for the last segment is shown in the

Current Segment column and the last segment

ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current seg-

ment is too high or too low, you can manually

override the setting by pressing the Speed or

Incline buttons. Every few times a Speed button is

pressed, an additional indicator will appear or dis-

appear in the Current Segment column; if any of

the columns to the right of the Current Segment

column have the same number of lit indicators as

the Current Segment column, an additional indica-

tor may appear or disappear in those columns as

well.

Important: When the current segment of

the program ends, the treadmill will automati-

cally adjust to the speed and incline settings

for the next segment.

To stop the program at any time, press the Stop

button.

To restart the program, press the Start

but

ton or the Speed increase button. The walking belt

will begin to move at 2 Km/h. When the next seg-

ment of the program begins, the treadmill will auto

matically adjust to the speed and incline settings

for the next segment.

Current

Segment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 500 CX - PETL41106 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pro-form 500 CX - PETL41106

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info