INSTRUCTIONS MANU
5.3 Setting the clock
Keep pressing the mode key until the clock symbol appears in the display. Then keep
the mode key pressed down for approx. 8 seconds until the hour display blinks. Then
press the mode key again to increase the hour value. When you have the hour value
desired keep the mode key pressed down for approx. 3 seconds, and the minute
display will start blinking. Repeat the pr
to set the minute value desired. To save the desired time setting, keep the mode key
pressed down for approx. 8 seconds.
You have now completed all y
5.4 Bicycle computer check
To check that the bicycle computer and sensor have been correctly installed, press
the mode key to activate the display. Ensuring that the computer is fi
to the computer mount, turn the front wheel of your bicycle and the speed will
be displayed.
5.5 Restar
To reset entered and saved data, you ha
ODO display appears. Then keep the mode key pressed down for approx. 6 seconds,
and repeat the settings (refer to section 5.1).
5.6 Automatic star
You don’t have to switch on the bicycle computer each time before use (in time
display). When you start r
bicycle comes to rest. The bicycle computer will automatically switch to power saving
mode, if the bicycle is not in use for a period longer than 10 minutes.
6. MODES/FUNCTIONS
After st
Speed: is continuously calculated and updated, and shown in the upper par
display. Measuring range: 0.
Press the mode key to switch between the following modes:
• DO (total distance travelled):
All kilometres (miles) tr
Maximum memory: 1
• MAX (maximum speed):
The maximum speed att
Maximum memory: 1
• AVG (average speed)
Maximum memory: 99.9
The “ERR” symbol will appear
• The clock symbol (time)
• SCAN (Scan function):
R
mode. The wSCAN will appear in the display. In this mode, the DST, time, TM,
A
second
• TM (journey time / journey chronometer):
A
Maximum memory: 1
• DST (journey distance):
A
Maximum memory: 999.9
6.
Press the mode key to display (DST). Then press the mode key again and keep
pressed down for approx. 3 seconds. The 4 route data readings (journey dist
journey time, average speed and maximum speed) will be reset to zero.
7
7
Unscrew the lid of the batter
computer) using a coin. Insert t
the lid and screw shut. After t
repeated (refer to section 5.2 Setting the tyre size).
10. W
Bicycle computer article no.: 0526
This bicycle computer is provided with a 2-year warranty. The warranty period star
from the date of purchase (purchase receipt, proof of purchase). Dur
period, address any complaints you may have to your dealer or the service address
provided below. During this period we will correct free of charge all faults caused by
material defects or malfunctioning.
Batteries, defects caused by improper handling, a fall, impact and the like are
excluded from the warranty. Please note that the warranty period is not af
any repair or replacement. The 2-year warranty period star
date shall remain in effect.
After the war
bicycle computer to the service address provided below to be repaired. Any repairs
caused after the war
prior telephone contact, please send your properly packaged bicycle computer (with
your purchase receipt) with suffi
Prophete GmbH u. Co. KG
Lindenstrasse 50
D-33378 Rheda-Wiedenbrück
Phone:
Fax: +49 (0) 5242 4
Email address: service@prophete.net
Website: www.prophete.de
5. INITIAL
We recommend that you fi
the bicycle computer the fi
5.
Before you can use the bicycle computer for the fi
settings. Insert t
you want to change any settings, press the reset key on the back of the computer.
This will automatically test the LCD segments. Press the mode key to end the test.
Now “KM/h” will blink. If you want to change to M/h press the mode key. Then keep
the mode key pressed down until the fi
to table 5.2). You can now increase the number by briefl
When the value you want appears, hold the mode key down – the next digit will
then star
You now have another opportunity to set kilometres or miles – briefl
mode key to set miles. Keep the mode key pressed down for approx. 3 seconds to
save your setting.
5.2 Setting the tyre size
After inser
the procedure described in section 5.1.
Determining the tyre size: mark t
alternatively, use the valve for orientation. Rotate the wheel through one revolution
and measure the distance covered in cm. This is your entry value. Or alter
use the table below for orient
8.
It is hereby confi
requirements of the following European guidelines:
2004/108/EG EMV guideline
European Parliament and Council guideline from 15.
2006/95/EG Low voltage guideline
European Parliament and Council guideline from 12.1
The conformity of this product with t
ance with the harmonised and non-har
½
9.
In the event of an error occurr
make any complaint about the bicycle computer.
Speed not displayed
• Check for correct magnet/sensor alignment
• Check
• The display will not work if the batteries are too weak
Incorrect speed reading, or speed is displayed when not in motion,
or maximum speed display is too high
• Check that you have the right setting for the tyre size
• Check that you have the right km/miles setting
• Check that magnet and sensor are correctly positioned
• It is possible that unknown atmospheric or RF disturbances, atmospheric or
r
an incor
No display (blacked out)
Too high temperature, or display is exposed to direct sunlight. Displa
normal when cooled off.
Display shows erratic numbers
Remove bicycle computer battery and reinsert.
No display
• Check the batteries
• Check that the batteries are inser
BICY
OPERA
Art. No.: 0526 | 8 Functions
0526_layout_en.indd 10526_layout_en.indd 1 10.08.2011 8:49:13 Uhr10.08.2011 8:49:13 Uhr
