Bedienungsanleitung Roland BK-9 Tone Drum Kit List (Seite 48 von 64) (Englisch, Holländisch)

527395

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

MFX types and parameters

invert the phase.

z Delay HF Damp (200~8000Hz, Bypass) —Adjusts the frequency

above which sound fed back to the eect is ltered out. If you

don’t want to lter out any high frequencies, set this parameter

to BYPASS.

z Delay Balance (D100:0W, D50:50W, D0:100W) —Adjusts the

volume balance between the sound that is sent through the

delay (W) and the sound that is not sent through the delay (D).

z Level (0~127) —Output level.

30. OD Chorus

This eect connects distortion and a chorus in series.

z Distortion Drive (0~127) —Degree of distortion. Also changes

the volume.

z Distortion Panpot (L64~0~63R) —Stereo location of the

distortion sound.

z Chorus Pre Delay (0.0~100.0ms) —Adjusts the delay between

the incoming direct signal and the moment when the chorus

starts working.

z Chorus Rate (0.05~10.0Hz) —Frequency, i.e. modulation speed.

z Chorus Depth (0~127) —Modulation intensity.

z Chorus Balance (D100:0W, D50:50W, D0:100W) —Volume

balance between the direct sound (D) and the chorus sound

(W).

z Level (0~127) —Output level.

31. DST Flanger

This eect connects distortion and a anger eect in series.

z Distortion Drive (0~127) —Degree of distortion. Also changes

the volume.

z Distortion Panpot (L64~0~63R) —Stereo location of the

distortion sound.

z Flanger Pre Delay (0.0~100.0ms) —Adjusts the delay time from

when the direct sound begins until the anger sound is heard.

z Flanger Rate (0.05~10.0Hz) —Frequency, i.e. modulation

speed.

z Flanger Depth (0~127) —Modulation intensity.

z Flanger Feedback (–98%~0~98%) —Adjusts the proportion of

the anger sound that is fed back into the eect. Negative (–)

settings will invert the phase.

z Flanger Balance (D100:0W, D50:50W, D0:100W) —Volume

balance between the direct sound (D) and the anger sound

(W).

z Level (0~127) —Output level.

32. DST Delay

This eect connects distortion and a delay eect in series.

z Distortion Drive (0~127) —Degree of distortion. Also changes

the volume.

z Distortion Panpot (L64~0~63R) —Stereo location of the

distortion sound.

z Delay Time (0.0~500.0ms) —Adjusts the time until the delay is

heard.

z Delay Feedback (–98%~0~98%) —Adjusts the amount of the

delay sound that’s fed back into the eect. Negative (–) settings

invert the phase.

z Delay HF Damp (200~8000Hz, Bypass) —Adjusts the frequency

above which sound fed back to the eect is ltered out. If you

don’t want to lter out any high frequencies, set this parameter

to BYPASS.

z Delay Balance (D100:0W, D50:50W, D0:100W) —Adjusts the

volume balance between the sound that is sent through the

delay (W) and the sound that is not sent through the delay (D).

z Level (0~127) —Output level.

33. EH Chorus

This eect connects an enhancer and a chorus in series.

z Enhancer Sens (0~127) —Sensitivity of the enhancer.

z Enhancer Mix Level (0~127) —Level of the overtones

generated by the enhancer.

z Chorus Pre Delay (0.0~100.0ms) —Adjusts the delay between

the incoming direct signal and the moment when the chorus

starts working.

z Chorus Rate (0.05~10.0Hz) —Frequency, i.e. modulation speed.

z Chorus Depth (0~127) —Modulation intensity.

z Chorus Balance (D100:0W, D50:50W, D0:100W) —Volume

balance between the direct sound (D) and the chorus sound

(W).

z Level (0~127) —Output level.

34. EH Flanger

This eect connects an enhancer and a anger in series.

z Enhancer Sens (0~127) —Sensitivity of the enhancer.

z Enhancer Mix Level (0~127) —Level of the overtones

generated by the enhancer.

z Flanger Pre Delay (0.0~100.0ms) —Adjusts the delay time from

when the direct sound begins until the anger sound is heard.

z Flanger Rate (0.05~10.0Hz) —Frequency, i.e. modulation

speed.

z Flanger Depth (0~127) —Modulation intensity.

z Flanger Feedback (–98%~0~98%) —Adjusts the proportion of

the anger sound that is fed back into the eect. Negative (–)

settings will invert the phase.

z Flanger Balance (D100:0W, D50:50W, D0:100W) —Volume

balance between the direct sound (D) and the anger sound

(W).

z Level (0~127) —Output level.

35. EH Delay

This eect connects an enhancer and a delay in series.

z Enhancer Sens (0~127) —Sensitivity of the enhancer.

z Enhancer Mix Level (0~127) —Level of the overtones

generated by the enhancer.

z Delay Time (0.0~500.0ms) —Adjusts the time until the delay is

heard.

z Delay Feedback (–98%~0~98%) —Adjusts the amount of the

delay sound that’s fed back into the eect. Negative (–) settings

invert the phase.

z Delay HF Damp (200~8000Hz, Bypass) —Adjusts the frequency

above which sound fed back to the eect is ltered out. If you

don’t want to lter out any high frequencies, set this parameter

to BYPASS.

z Delay Balance (D100:0W, D50:50W, D0:100W) —Adjusts the

volume balance between the sound that is sent through the

delay (W) and the sound that is not sent through the delay (D).

z Level (0~127) —Output level.

36. Chorus DLY

This eect connects a chorus and a delay in series.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Tone Drum Kit List Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info