10
To avoid risk, check the condition and firm attachment of the blade before every
mowing job. The blade attachment screw must always be ti
workshop. If the blade screw is too tight or too loose, the blade coupling and cutt
can become damaged or loose which can lead to serious injuries. A worn or damaged
blade must always be replaced. (Refer here to the chapter "Cutter blade care").
In addition, check the fan, blade coupling and fan housing eve
wear and a tight fit. Also check equipment screws and nuts for a f
necessary.
Make sure the spark plug connector is fitted tightly.
plug connector has not been installed correctly.
the engine running. Danger: electric shock.
If the mower mechanism becomes blocked e.g. by colliding with an obstacle, have an
authorised workshop check whether any parts of
Always have any necessary repairs done by an authorised workshop t
If the machine starts to vibrate unusually heavily or to make unusual noises, please
have it checked immediately by an authorised workshop.
Pos: 18.10 /
Time restrictions
Pos: 18.11 /
The time at which lawnmowers may be used varies from region to region. Please ask
the corresponding authorities before using your mower.
Pos: 18.12 /In
Tips on caring for your lawn
Pos: 18.13 /
Mowing (Illustration M )
Pos: 18.14 /In
WARNING
Remove any objects (stones, wood, branches, etc.) from the l
cut; but still watch out for objects lying around during the mowing process.
Ask your dealer about lawn care instructions. Informat
mowing can also be found on the manufacturer website.
Pos: 18.15 /In
Mulching
Pos: 18.16 /
Your lawn mower can also be equipped with a mulching kit. The respective conversion
kit to a mulching system is available as an accessory from professional dealerships
(see genuine spare parts and accessories for the conversion kit order no.).
The mulching kit also includes tips and information about mulching. You will also find
information about mulching on the manufacturer website.
WARNING
Always have an authorised workshop carry out the conversi
mulching system. A wrongly assembled cutting blade coupli
that is tightened too tightly or too loosely can allow the cutting blade bars to
become loose and cause severe injur
If the grass should happen to be too high for mulching, the mulching mower can be
converted for mowing with a grass collecting bag in no time.
Pos: 18.17 /In @ 1
Converting the machine to rear ej
Pos: 18.18 /In
– Stop the engine.
– Lift the ejection flap.
– Remove the mulching plug from the channel U2 .
– Hook the grass collecting bag in the bracket provided on the mower housing S1 .
The mulching blade system does not have to be converted!
collecting bag can be reduced under difficult mowing conditions (e.g. wet grass).
For the equipment to be used as a mulching machine again, the mulching plug must be
installed again. To do this, remove the grass collecting bag, insert the mulching plug
into the ejector channel and close the ejector flap.
Clean the ejector channel first.
Pos: 19.1 /----
Pos: 19.2 /Inne
15 SERVICE INTERVALS
Pos: 19.3 /Inne
IMPORTANT
Avoid damage! Under extreme or unusual condi
than the ones specified below may be necessary. If you establish any probl
please contact an authorised workshop.
Pos: 19.4 /Inne
Carry out routine servicing on the machine in line with the following servicing intervals.
Work must be carried out at the following servicing intervals in addition to the
maintenance work listed in these operating instructions.
Pos: 19.5 /Inne @ 1
Before initial
• Check the oil level Y1 .
• Check all screw connections for a tight fit.
• Check the cutting blade screw and have an authorised worksh
necessary.
• Check whether the safety control bar for the engine brake is working perfectly.
• Check that all protective devices have been attached properly and are not
damaged.
Pos: 19.6 /Inne
Before every operation
• Check the lawn area and remove any objects.
• Check the area of the boundary wires (if an automatic mower is being used for
lawn care).
• Check the oil level Y1 .
• Check the condition and firm fit of the blade, if necessary have an aut
workshop tighten the blade screw.
• Check whether the safety control bar for the engine brake is working perfectly.
• Check that all protective devices have been attached properly and are not
damaged.
• Check grass collecting equipment for wear or loss of functionality.
Pos: 19.7 /Inne
Every 10 operating hours
• Check all screw connections for a tight fit.
• Check the fan, blade coupling and fan housing regularly for wear and a tight fit.
Pos: 19.8 /Inne
After every operation
• Clean the mower.
• Check the blade for damage and wear.
Pos: 19.9 /Inne0.docx @ 502
43-COMPACT (SA1462), 43-COMPACT E (SA1461), R43 (SA1406)
Pos: 19.10 /In
Running-in time – aft
• Change the engine oil.
Pos: 19.11 /4151_1521.
Every 50 operating hours or annuall
• Change the motor oil.
Pos: 19.12 /In_0.docx @ 50 5375 @ @ 1
43-COMPACT (SA1741), 43-COMPACT E (SA1461), R43 (SA1406)
Pos: 19.13 /93458180_
Every 15-20 operating hours or annual
• Lubricate the wheel bearings.
Pos: 19.14 /In
All models
Pos: 19.15 /In46420_1521.
Every 25 operating hours or annuall
• Clean the air filter paper insert W .
• Clean the spark plug and adjust electrode distance Y .
Pos: 19.16 /Innentei990 @ @ 1
During annual servicing
• Have the air filter paper insert replaced W .
• Have the spark plug replaced Y .
Pos: 20.1 /----
Pos: 20.2 /Inne 1
16 CARE AND SERVICING OF Y
Pos: 20.3 /Inne748 @ @
Regular care is the best way to guarantee a long service life and problem-free
operation. Insufficient equipment maintenance will lead to
Pos: 20.4 /Inne
Only use original spare paronly those guarantee safety and quality!
Pos: 20.5 /InneHandschuhe
Safety instruction!
See table for explanation of
symbols page 3
Pos: 20.6 /Inne
Cleaning (Illustration O )
Pos: 20.7 /Inne_1521.
IMPORTANT
During cleaning and maintenance work,
forwards (spark plug facing upwar
occur. When tilting the mower upwards make sure the ejection flap does not get
damaged. Sec
NOTE
When tilting the mower upwards, make sure no oil or petrol escapes.
Remove dirt and residual grass directly after mowing. Use a brush or cloth for cleaning.
Do not rotate the cutter bar, as otherwise motor oil is pumped into the carburettor/air
filter and start-up difficulties can occur.
