Bedienungsanleitung Sangean U5DBT (Seite 8 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

in a downwards direction and stop automatically when

it finds a station of sufficient strength. After a few

seconds the display will update. The display will show

the frequency of the signal found. If the signal is strong

enough and there is RDS data present then the radio

will display the station name.

4. When the waveband end is reached, your radio will

recommence tuning from the opposite waveband end.

5. Adjust the Volume control to the required setting.

6. To switch off your radio, press the Power On / Off

button.

Manual tuning – FM

1. Press the Power On / Off button to switch on your radio.

2. Press the Source button to select FM waveband.

3. Rotate the Tuning control knob to tune to a station. The

frequency will change in steps of 50 kHz. When the

waveband end is reached, the radio will recommence

tuning from the opposite waveband end.

4. Adjust the Volume control to the required setting. To

switch off your radio, press the Power On / Off button.

Display Modes – FM

On FM the bottom line of the display can be set to any of

the following modes:

1. Press and release the Info button repeatedly to cycle

through the various modes.

a. Radio text

displays scrolling text messages

V.H.B.N

[No RadioText]

such as artist / track name, phone in number etc.

b. Program type

displays type of station being

V.H.B.N

News

listened to e.g. Pop, Classic, News, etc.

c. Frequency V.H.B.N

106.50MHz

displays the frequency of the

station being listened to.

d. Signal strength

displays the signal strength for the

V.H.B.N

SGLV

station being listened to.

e. Battery level / Mains power V.H.B.N

Bat.level

V.H.B.N

Mains Power

displays current battery level

of using batteries operation. (If

using AC power cord operation,

"Mains Power" is shown on the

screen.)

f. Time V.H.B.N

2:18 PM

displays the current time.

g. Date

displays the current date.

V.H.B.N

8-9-2016

NOTE

If no RDS information is available, the radio will be

unable to display the station name, scrolling text and

program type information.

Scan sensitivity setting – FM

Your radio includes a local / distant option for the auto-

scan function. By setting the radio to the ‘local’ scan option,

weaker signals from more distant transmitters can be

ignored by the radio, making stronger signals easier to nd.

Press the Power On / Off button to switch on your

radio.

If needed, press and release the Source button until

the FM band is selected.

Press the Menu button to access FM

FM menu. Rotate the Tuning

control knob until “FM Scan Zone” shows on the

display. Press and release the Tuning control knob to

enter the scan sensitivity adjustment mode. The current

setting will be marked with an asterisk.

Rotate the Tuning control knob to FM Scan Zone *

FM Scan Zone

switch between “Local” (Strong

stations only) and “Distant” (All

stations) options on the lower line

of the display. The “Distant” option

will allow the radio to find weaker signals when

scanning.

Press and release the Tuning control knob to conrm

your selection. The setting is stored in the radio and

remains in force until changed or until a System Reset.

Preset stations in DAB and FM modes

There are 5 memory presets for each DAB / FM

wavebands.

Press the Power On / Off button to switch on your radio.

Tune to the required station as previously described.

Press and hold the required Preset Preset 1

stored

button until the display shows e.g.

Preset 1 stored. The station will be

stored under the chosen preset button. The

corresponding preset number e.g. “P1” will show on the

display. Repeat this procedure for the remaining

presets.

Station stored in the memories may be over written by

following the above procedure.

Recall a preset in DAB and FM modes

1. Press the Power On / Off button to turn on the radio.

Press the Source button to select the required

waveband.

Momentarily press the required 87.50MHz P1

[No RadioText]

Preset button, the preset number

and station will appear in the

display.

NOTE

The display will show “Preset Empty” if no station has

been stored to that preset.

Listening to music via Bluetooth

streaming

You need to pair your Bluetooth device with your U5 DBT

before you can auto-link to play / stream Bluetooth music

through your U5 DBT. Pairing creates a ‘bond’ so the two

devices can recognize each other.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info