Bedienungsanleitung Sangean U5DBT (Seite 6 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Using the radio for the rst time

1. Place your radio on a at surface.

2. Straighten up the antenna.

3. Plug the AC power cord into an AC

Welcome to

Digital Radio

socket. The display will show

“Welcome to Digital Radio” for a few seconds.

After short time, the current time will appear on the

display.

4. If no time is displayed, the screen

00:00

Time is not set

will show “00:00”.

Press the Power On / Off button

to turn on your radio and it will nd a DAB clock radio

stations. It may be necessary to relocate your radio to

a position giving better reception and carry out a scan

to nd stations as described in later sections.

IMPORTANT

The mains plug is used as the means of connecting the

radio to the mains supply. The mains socket used for

the radio must remain accessible during normal use. In

order to disconnect the radio from the mains completely,

the mains plug should be removed from the mains outlet

completely.

Operating your radio – DAB

Straighten the antenna properly which is for both DAB

and FM reception. Press the Power On / Off button to

switch on your radio.

2. Press the Source button to select DAB band.

If this is the rst time the radio is used, a quick scan of

Band III DAB channels will be carried out. If the radio

has been used before, the last used station will be

selected.

During Autotune, as new stations

Scanning...

019

are detected, the station counter

on the right hand side of the display will increase and

stations will be added to the list.

The display shows a bar graph indicating progress of

autotune.

When the Autotune is completed, the first station (in

numeric-alpha order 0…9…A…Z) will be selected.

If the station list is still empty after the Autotune, your

radio will display “No DAB Station”.

If no signals are found, it may be necessary to relocate

your radio to a position giving better reception.

NOTE

That radio station name and frequency displays shown

in this user guide may differ from those that you see

on your radio. Broadcasters may change radio station

names that are transmitted, and the frequencies used

for DAB and FM radio stations may not be the same in

all parts of the country.

Selecting a station – DAB

Press the Power On / Off button to switch on your

radio.

Press and release the Source

DAB

button until the DAB mode is

selected. The display will show the name of the radio

station currently selected.

Rotate the Tuning control knob to

Station list

scroll through the list of available

stations.

Press and release the Tuning

BBC Radio 2

Connecting...

control knob to select the station.

The display may show “Connecting…” while your radio

nds the new station.

5. Adjust the Volume control to the required setting.

NOTE

If after selecting a station, the station is not found it may

be necessary to relocate your radio to a position giving

better reception.

Secondary service – DAB

1. Certain radio stations have one or more secondary

services associated with them. If a station has a

secondary service associated with it, the display will

show “>>” next to the station name on the station list.

The secondary service will then appear immediately

after the primary service as you rotate the Tuning

control knob.

2. Press and release the Tuning control knob to select

the station. Most secondary services do not broadcast

continually and if the selected service is not available,

the radio will re-tune to the associated primary service.

Display mode – DAB

Your radio has a range of display options when in DAB

mode:

1. Press and release the Info button to cycle through the

various modes.

a. Scrolling text (DLS)

displays scrolling text messages

sunshine live

electronic music

such as artist / track name, phone in number, etc.

b. Signal strength

displays the signal strength of radio

sunshine live

reception. The clear unfilled

rectangle indicates minimum signal level required for

satisfactory reception.

c. Program type

displays type of station being

sunshine live

Pop Music

listened to e.g. Pop, Classic, News

etc.

d. Multiplex name

displays name of multiplex to which

sunshine live

DR Deutschland

current station belongs.

e. Channel & frequency

displays current channel and

sunshine live

12B 225.648MHz

frequency.

f. Bit rate / audio type

displays the digital bit rate and the

sunshine live

72kbps / DAB+

audio type for the currently tuned DAB station.

g. Battery level / Mains power

displays current battery level of

sunshine live

Bat.level

sunshine live

Mains Power

using batteries operation. (If using

AC power cord operation, “Mains

Power” is shown on the screen.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info