Bedienungsanleitung Sangean U5DBT (Seite 7 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

h. Time

displays the current time.

sunshine live

9:07 AM

i. Date

displays the current date.

sunshine live

8-9-2016

Finding new stations – DAB

As time passes new stations may become available. To

nd new stations proceed as follows:

To carry out a full scan of the entire DAB Band III

frequencies press and release the Auto tune button.

2. As new stations are found, the

Scanning...

019

station counter on the right hand

side of the display will increase and stations will be

added to the list.

Manual Tuning – DAB

Manual tuning allows you to tune directly to the various

DAB band III channels.

1. Press the Menu button to access DAB menu.

2. Rotate the Tuning control knob to

DAB

Manual tune

<5A 174.928MHz >

nd “Manual tune”.

Press and release the Tuning

control knob to enter DAB channels

in the list. Rotate the Tuning control

knob to select required DAB channel. When required

DAB channel is found, press and release the Tuning

control knob to select the required DAB channel.

Dynamic Range Control (DRC) setting –

DAB

DRC can make quieter sound easier to hear when your

radio is used in a noisy environment.

In DAB band, press the Menu button to access DAB

menu.

Rotate the Tuning control knob to

DAB

<DRC >

nd “DRC ”. Press and release the

Tuning control knob to enter

adjustment mode.

Rotate the Tuning control knob to

DRC

DRC

select required DRC setting

(default is off).

DRC off DRC is switched off,

Broadcast DRC will be ignored.

DRC high DRC is set as sent by

broadcaster.

DRC low DRC level is set to 1 / 2 that sent by

broadcaster.

Press and release the Tuning control knob to conrm

the setting.

NOTE

Not all DAB broadcasts are able to use the DRC function.

If the broadcast does not support DRC, then the DRC

setting in the radio will have no effect.

Station order setup

Your radio has 2 station order settings from which you can

choose. The station order settings are alphanumeric and

ensemble.

NOTE

The default station order on your radio is alphanumeric.

Press the Power On / Off button to switch on your radio.

Press the Source button to select DAB band.

Press the Menu button to access DAB menu.

Rotate the Tuning control knob until DAB

the display shows “Station order”.

Press the Tuning control knob to enter the station order

adjustment mode.

Rotate the Tuning control knob to

Station order *

Station order

choose “Alphanumeric” or

“Ensemble”.

“Alphanumeric” -sorts the station

list alpha-numerically 0...9 A...Z.

“Ensemble” – sorts the station list by DAB multiplex.

The current setting is indicated by an asterisk.

Press the Tuning control knob to select the required

station order.

Prune stations

If you move to a different part of the country, some of the

stations which were listed may no longer be available.

Also from time to time, some DAB services may stop

broadcasting, or may change location or frequency.

Stations which cannot be found, or which have not been

received for a very long time are shown in the station list

with a question mark. The prune stations function will

delete the marked DAB stations from your station list.

Press the Menu button to access DAB menu.

2. Rotate the Tuning control knob to DAB

Prune?

<Yes> No

nd “Prune”. Press and release the

Tuning control knob to enter

adjustment mode. Then rotate the

Tuning control knob to select “Yes”

or “No”. To activate the Prune function select “Yes”, and

press and release the Tuning control knob to conrm

the setting.

3. If you do not wish to prune stations, Prune?

Yes <No>

select “No” and then press and

release the Tuning control knob to

conrm the setting.

NOTE

If you have moved your radio to a different part of the

country you should also carry out a search for new

stations (please see the section 'Finding new stations').

Operating your radio – FM

1. Straighten the antenna properly above the radio. Press

the Power On / Off button to switch on your radio.

2. Press the Source button to select FM waveband.

3. To scan up in frequency, rst rotate the Tuning control

knob in a clockwise direction and then press the

Auto tune button. Your radio will scan in an upwards

direction (low frequency to high frequency) and stop

automatically when it finds a station of sufficient

strength. To scan down in frequency, first rotate the

Tuning control knob in a anti-clockwise direction and

then press the Auto tune button. Your radio will scan

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info