Bedienungsanleitung Satel CA-6 (Seite 15 von 40) (Englisch)

699578

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

CA-6 SATEL 13

EXAMPLE:

LEDs: 1,3,6,8 are on, which gives value = 165:

State of the LEDs from 1 to 8 :  

VALUE

: 128+32 + 4+1 = 165

REACTION TIME

(ms):

PROGRAMMED VALUE

(165)

2640

FS25 - programming zone type (DEC)

Selection of the zone type depends on the detector type and configuration of connection to

the control panel. The following types of detectors and configurations are possible: NC,

NO, EOL, 2EOL/NC, 2EOL/NO. Determination of the configuration and the detector type is

necessary, since control panel interpretation of received information will depend on it. For

example, an open zone can mean correct state of the NO detector or violation of the NC

detector, as well as tamper in case of 2EOL configuration.

Programming consists in entering the suitable two-digit number (to determine the zone

type) for the particular zones. Having confirmed the detector type for one zone, the control

panel proceeds to programming the next zone type, until zone types are assigned to all 16

zones. The following numbers are correct:

00 - no detector (for unused zones)

01 - NC (normally closed)

02 - NO (normally open)

03 - EOL (end of line resistor –by default)

04 - 2EOL/NC (double end of line resistor – NC type detector)

05 - 2EOL/NO (double end of line resistor – NO type detector)

During the programming, the control panel displays the current parameter setting (in binary

format) on LEDs 1 to 8. The AB, AB LEDs show the zone for which the detector type is

being programmed.

EXAMPLE:

programming the EOL zones type for 1 - 6 zones, NC type for 7 - 8 zones,

[12345] [#] - enter the service mode

[2][5] [#] - call the function

[0][3] [#] - detector type for the first zone (AB, AB = 0001)

[0][3] [#] - detector type for the second zone (AB, AB = 0010)

[0][3] [#] - detector type for the third zone (AB, AB = 0011)

[0][3] [#] - detector type for the fourth zone (AB, AB = 0100)

[0][3] [#] - detector type for the fifth zone (AB, AB = 0101)

[0][3] [#] - detector type for the sixth zone (AB, AB = 0110)

[0][1] [#] - detector type for the seventh zone (AB, AB = 0111)

[0][1] [#] - detector type for the eighth zone (AB, AB = 1000)

the control panel automatically exits the function

FS26 - programming zone reaction type (zone function) (DEC)

The control panel reaction to a zone violation depends on the function assigned to the

given zone (e.g., the reaction will be different in case of a “24 h fire” type zone violation,

and in case of an “arming” zone violation).

The programming consists in entering an appropriate two-digit number for each zone to

determine its function (reaction type). Each of the CA-6 zones can perform one of the 20

functions:

00 - ENTRY/EXIT

01 - DELAYED

02 - INTERIOR DELAYED

03 - INSTANT

04 - DAY/NIGHT

05 - COUNTING C1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-6 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info