699578
16
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
14 Programming CA-6
06 - COUNTING C 2
07 - COUNTING C 3
08 - 24H AUDIBLE
09 - 24H AUXILIARY
10 - 24H SILENT
11 - 24H FIRE
12 - ARMING
13 - SILENT ARMING
14 - DISARMING
15 - NO ALARM ACTION
16 - ARM/DISARM
17 - DELAYED WITH SIGNALLING
18 - ARMING WITH BYPASS
19 - PERIMETER
FS27 - programming zone options (BIT)
Each control panel zone has eight options which activate additional functions of the zone.
The use of these options depends on the zone type. The control panel performance only
these function, which are relevant to the given zone. For example, it is no use to activate
the "auto-reset 1” (bypassed after first alarm) option or the "priority" option (arming
impossible, if the zone with activated option is violated) for the "arming" type zones.
Activation of such options has no effect.
Activation of the options is carried out individually for each zone and consists in lighting up
the corresponding LEDs.
The LEDs 1 to 8 have been assigned the following options:
No LED Option
ON
PRIORITY (arming impossible, if the zone with activated option is violated or
tampered)
1
OFF
arming possible, even if the zone with activated option is violated or tampered
ON
CHIME (zone generates chime signal when disarmed)
2
OFF
zone does not generate chime signal
ON
zone bypassed after first alarm (AUTO-RESET 1)
3
OFF
always alarms (when both options 3 and 4 are off)
ON
zone bypassed after third alarm (AUTO-RESET 3)
4
OFF
always alarms (when both options 3 and 4 are off)
ON
information on the zone violation will not be reported to the monitoring stations if the
violation occurred during the entry delay (ABORT DELAY)
5
OFF
information on the zone violation during the entry delay will be reported
ON
zone will be bypassed for 120 sec. after power is switched on (which prevents
triggering alarms e.g. when starting the control panel) (POWER UP DELAY)
6
OFF
zone controlled immediately after power-up
ON
zone violation end code will be reported to the monitoring station not immediately but
only after alarming is over (RESTORE AFTER BELL)
7
OFF
zone violation end code will be reported to the monitoring station immediately (if
option 8 is off)
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel CA-6 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel CA-6

Satel CA-6 Zusatzinformation - Deutsch - 19 seiten

Satel CA-6 Bedienungsanleitung - Deutsch - 19 seiten

Satel CA-6 Installationsanweisung - Deutsch - 80 seiten

Satel CA-6 Bedienungsanleitung - Deutsch - 18 seiten

Satel CA-6 Kurzanleitung - Englisch - 8 seiten

Satel CA-6 Installationsanweisung - Englisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info