699578
20
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
18 Programming CA-6
FS36 - programming list of zones for OUT3 (BIT)
The function programs the list of zones associated with the OUT3 output. The
programming procedure is the same as for the FS32.
FS37 - programming OUT4 output
The function defines the basic parameters associated with the OUT4 output. The
programming procedure is the same as for the FS31.
FS38 - programming the list of zones for OUT5 (BIT)
The function programs the list of zones associated with the OUT5 output. The
programming procedure is same as for the FS32.
FS39 - programming OUT5 output
The function defines the basic parameters associated with the OUT5 output. The
programming procedure is the same as for the FS31.
FS40 - programming list of zones for OUT5 (BIT)
The function programs the list of zones associated with the OUT5 output. The
programming procedure is same as for the FS32.
Monitoring - programming parameters of transmission to stations
FS43 - programming station 1 telephone number (HEX)
FS44 - programming station 2 telephone number (HEX)
In functions FS43 – FS44 are programmed numbers of up to 16 characters (digits and
control codes) in the same way as the computer telephone number (FS4).
FS45 - programming station 1 format (HEX)
FS46 - programming station 2 format (HEX)
The functions FS45 – FS46 define the standard of event transmission to the monitoring
stations. The programming consists in entering a double-character number of format
according to the list below and confirming it with the key [#].
TRANSMISSION FORMATS:
00 - Silent Knight, Ademco slow (1400Hz, 10Bps)
01 - Sescoa, Franklin, DCI, Vertex (2300Hz, 20Bps)
02 - Silent Knight fast (1400Hz, 20Bps)
03 - Radionics 1400Hz
04 - Radionics 2300Hz
05 - Radionics with parity 1400Hz
06 - Radionics with parity 2300Hz
07 - Ademco Express (DTMF)
08 - Silent Knight, Ademco slow, extended
09 - Sescoa, Franklin, DCI, Vertex, extended
0A - Silent Knight fast, extended
0B - Radionics 1400Hz, extended
0C - Radionics 2300Hz, extended
0D - do not program
0E - Contact ID selected codes
0F - Contact ID full
Notes:
In the Contact ID (CID) format not all events have a CID code assigned to them (see:
Appendix – control panel events list). Monitored are all events with the CID code.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel CA-6 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel CA-6

Satel CA-6 Zusatzinformation - Deutsch - 19 seiten

Satel CA-6 Bedienungsanleitung - Deutsch - 19 seiten

Satel CA-6 Installationsanweisung - Deutsch - 80 seiten

Satel CA-6 Bedienungsanleitung - Deutsch - 18 seiten

Satel CA-6 Kurzanleitung - Englisch - 8 seiten

Satel CA-6 Installationsanweisung - Englisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info