Bedienungsanleitung Scheppach Basa 7.0 (Seite 14 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

782165

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

DGB

Supply volume

Bandsaw

Sawband 20 mm

Fence

Suction connectio piece, 100 mm diam

Push stick

Assembly Accesoires

Operating instructions

Technical data

Length/width/height mm ............................................................................. .......................2060x1050x1150

Bench size mm ...............................................................................................................................840x640

Working height mm ................................................................................................................................. 900

Sawband mm ......................................................................................................................... 20x0,45x4425

Band wheel diameter mm .......................................................................................................................600

Cutting height at 90° mm ........................................................................................................................ 400

Clearance width mm .............................................................................................................................. 590

Parallel cutting width mm ....................................................................................................................... 300

Parallel stop length mm .......................................................................................................................... 650

Bench swing range mm ................................................................................................... degrees -15°/+47°

Cutting speed with 2 switching levels m/min ....................................................................................... 1200

Weight kg ................................................................................................................................................ 250

Noise parameters

The noise emission values determined ac-

cording to EN 23746 for the sound level and

according to EN 31202 (coefcient of correction

k3 calculated according to Appendix A.2 of EN

31204) for the sound level at the workplace are

as follows, based on the working conditions

listed in ISO 7904 Appendix A:

Sound level at the workplace in dB

Idle running LpAeq =85 dB(A)

Operation LpAeq = 95 dB(A)

A measurement uncertainty allowance K = 4 dB

applies to the mentioned emission values.

Machine description

Due to its perfected design, the machine offers

a versatile application for processing wood and

plastics in the workshop.

The upper and lower bandwheel is protected

by a xed guard and an articulated cover. Upon

opening the cover, the machine is switched off.

Switching on again is only possible with the co-

ver closed. The non-cutting part of the sawbelt

above the table top is covered by a guard xed

to the sawbelt guide, the latter being protected

against inadvertant opening by the xed guard

of the upper band wheel. The non-cutting part of

the sawbelt under the table top is protected by a

xed cover.

The swivelling range of the table from -15° to

+47°

allows versatile cutting possibilities (e.g)

• Longitudinal cuts

• Crosscuts

• Diagonal cuts

• Curved and irregular cuts

• Cuts for dovetails and tenons

• On-edge cuts of squared beams

Please consult also the working hints in the

operating instructions

General notes

1. After unpacking, check all parts for any trans-

port damage. Inform the supplier immediately

of any faults.

2. Later complaints cannot be considered.

3. Make sure the delivery is complete.

4. Before putting into operation, familiarize your-

self with the machine by carefully reading these

instructions.

5. Use only original scheppach accessories,

wearing or replacement parts. You can nd

replacement parts at your scheppach dealer.

6. When ordering, include our item number

and the type and year of construction of the

machine.

NOTE:

In accordance with valid product liability laws,

the manufacturer of this device shall not be

responsible for damage to and from this device

which results from:

1. Improper care.

2. Noncompliance with the Operating Instruc

tions.

3. Repairs made by unauthorized persons.

4. The installation and use of any parts which

are not original scheppach replacement parts.

5. Improper use and application.

6. Failure the electrical system as a result of

non com pliance with the legal and applicable

electrical directives and VDE regulations

0100, DIN 57113 / VDE 0113.

 We recommend that you read through the

entire operating instructions before putting

into operation.

These operating instructions are to assist you

in getting to know your machine and utilize its

proper applications.

The operating instructions contain important

notes on how you work with the machine safely,

expertly, and economically, and how you can

avoid hazards, save repair costs, reduce down-

time and increase the reliability and service life

of the machine.

In addition to the safety requirements contained

in these operating instructions, you must be

careful to observe your country’s applicable

regulations.

The operating instructions must always be near

the machine. Put them in a plastic folder to

protect them from dirt and humidity. They must

be read by every operator before beginning work

and observed conscientiously. Only persons

who have been trained in the use of the machine

and have been informed of the various dangers

may work with the machine. The required mini-

mum age must be observed.

In addition to the safety requirements contai-

ned in these operating instructions and your

country’s applicable re gulations, you should

observe the generally recognized technical

rules concerning the operation of woodworking

machines.

Motor 230 V / 50 Hz 400 V / 50 Hz

Consumption P1 (kW) 2,80 3,80

Output P2 (kW) 2,00 2,90

Scheppach Basa 7.0 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info