Bedienungsanleitung Scheppach HC08 (Seite 13 von 96) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Schwedisch)

758664

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

13 І 96

2. Device description (Fig 1-4)

1. Transport handle

2. Pressure switch

3. Pressure vessel

4. Supporting foot

5. Housing cover

6. Motor

7. Air lter

8. Overload / protection switch

9. Oil plug

10. Oil level -control display / Oil drain plug

11. Drain plug for condensation water

12. Safety valve

13. Pressure gauge (for reading the preset vessel

pressure)

14. Pressure gauge (for reading the set pressure)

15. Quick-lock coupling (regulated compressed air)

16. Pressure regulator

17. ON/OFF switch

A Screw

B Washer

C Air lter cover

D Interior air lter element

E Filter element

3. Unpacking

• Open the packaging and remove the device carefully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty pe-

riod has expired.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

4. Intended use

The compressor is designed to generate compressed

air for compressed-air driven tools which can be driven

with an air volume of up to approx. 130 l/min (e.g. tire

in ator, blow-out pistol and paint spray gun). Due to

the limited air output it is not possible to use the com-

pressor to drive tools with very high air consumption

(for example orbital sanders, rod grinders and hammer

screwdrivers).

The equipment is to be used only for its prescribed pur-

pose. Any other use is deemed to be a case of misuse.

The user / operator and not the manufacturer will be li-

able for any damage or injuries of any kind caused as

a result of this.

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

we hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advantage

of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only

be operated by persons who were instructed concern-

ing the operation of the machine and who are informed

about the associated dangers. The minimum age re-

quirement must be complied with.

In addition to the safety notices contained in this op-

erating manual and the particular instructions for your

country, the generally recognised technical regulations

for the operation of identical devices must be complied

with.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HC08 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info