Bedienungsanleitung Scheppach HC08 (Seite 14 von 96) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Schwedisch)

758664

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

14 І 96

plugging the plug into an outlet.

12 Use extension cables for outdoors

–Only use approved and appropriately identied

extension cables for use outdoors.

–Only use cable reels in the unrolled state.

13 Remain attentive

–Pay attention to what you are doing. Remain sen-

sible when working. Do not use the electric tool

when you are distracted.

14 Check the electric tool for potential damage

–Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free

and function as intended prior to continued use

of the electric tool.

–Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and all

conditions must be fullled to ensure fault-free

operation of the electric tool.

–Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speci-

ed in the operating manual.

–Damaged switches must be replaced at a cus-

tomer service workshop.

–Do not use any faulty or damaged connection

cables.

–Do not use any electric tool on which the switch

cannot be switched on and off.

15 Have your electric tool repaired by a qualied elec-

trician

–This electric tool conforms to the applicable safety

regulations. Repairs may only be performed by an

electrician using original spare parts. Otherwise

accidents can occur.

16 Important!

–For your own safety you must only use the acces-

sories and additional units listed in the operating

instructions or recommended or specied by the

manufacturer. The use of mounted tools or ac-

cessories other than those recommended in the

operating instructions or catalog may place your

personal safety at risk.

17 Noise

–Wear ear muffs when you use the compressor.

18 Replacing the power cable

–To prevent hazards, leave the replacement of

damaged power cables strictly to the manufac-

turer or a qualied electrician. There is a risk of

electric shock!

19 Inating tires

–Directly after inating tires, check the pressure

with a suitable pressure gauge, for example at

your lling station.

20 Roadworthy compressors for building site operations

–Make sure that all lines and ttings are suitable

for the maximum permissible operating pressure

of the compressor.

21 Place of installation

–Set up the compressor on an even surface.

Please note that our equipment has not been designed

for use in commercial, trade or industrial applications.

Our warranty will be voided if the equipment is used in

commercial, trade or industrial businesses or for equiv-

alent purposes.

5. Safety information

m Attention! The following basic safety measures must

be observed when using electric tools for protection

against electric shock, and the risk of injury and re.

Read all these notices before using the electric tool and

keep the safety instructions for later reference.

Safe work

1 Keep the work area orderly

–Disorder in the work area can lead to accidents.

2 Take environmental inuences into account

–Do not expose electric tools to rain.

–Do not use electric tools in a damp or wet environ-

ment. There is a risk of electric shock!

–Make sure that the work area is well-illuminated.

–Do not use electric tools where there is a risk of

re or explosion.

3 Protect yourself from electric shock

–Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep children away

–Do not allow other persons to touch the equipment

or cable, keep them away from your work area.

5 Securely store unused electric tools

–Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

–They work better and more safely in the specied

output range.

7 Wear suitable clothing

–Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

–Rubber gloves and non-slip shoes are recom-

mended when working outdoors.

–Tie long hair back in a hair net.

8 Do not use the cable for purposes for which it is

not intended

–Do not use the cable to pull the plug out of the outlet.

Protect the cable from heat, oil and sharp edges.

9 Take care of your tools

–Keep your compressor clean in order to work well

and safely.

–Follow the maintenance instructions.

–Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

–Check extension cables regularly and replace

them when damaged.

10 Pull the plug out of the outlet

–During non-use of the electric tool or prior to main-

tenance and when replacing tools.

11 Avoid inadvertent starting

–Make sure that the switch is switched off when

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HC08 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info