Bedienungsanleitung Scheppach HL660 (Seite 21 von 112) (Deutsch, Englisch, Französisch, Italienisch)

781858

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

Cylinder speed (fast fwd.) cm/

sec 3,08

Cylinder speed (return) cm/sec 5,29

Hydraulic uid capacity l 3,5

Operating pressure bar 208

Motor speed 1/min 2800

Subject to technical changes!

Noise

m WARNING: Noise can have serious effects on

your health. If the machine noise exceeds 85 dB (A),

please wear suitable hearing protection.

8. Unpacking

Open the packaging and remove the device carefully.

Remove the packaging material as well as the pack-

aging and transport bracing (if available).

Check that the delivery is complete.

Check the device and accessory parts for transport

damage.

In case of complaints the dealer must be informed

immediately. Subsequent complaints will not be ac-

cepted.

If possible, store the packaging until the warranty pe-

riod has expired.

Read the operating manual to make yourself familiar

with the device prior to using it.

Only use original parts for accessories as well as for

wearing and spare parts. Spare parts are available

from your specialized dealer.

Specify our part numbers as well as the type and year

of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

9. Attachment / Before starting the

equipment

At least two people are required to install the

device.

9.1 Installing the base frame (g. 3 + 4)

For technical reasons of packaging, the stand must

be tted by the customer.

Use the attached hexagon bolts M6 x 16 with nut

1. Remove the hub cap and disassemble the wheels.

2. Connect all sinlge parts of the stand with the ma-

chine.

m WARNING! This electric tool generates an elec-

tromagnetic eld during operation. This eld can im-

pair active or passive medical implants under cer-

tain conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool.

Remaining hazards

The machine has been built using modern tech-

nology in accordance with recognized safety

rules. Some remaining hazards, however, may

still exist.

• The splitting tool can cause injuries to ngers and

hands if the wood is incorrectly guided or support-

ed.

• Thrown pieces can lead to injury if the work piece is

not correctly placed or held.

• Injury through electric current if incorrect electric

connection leads are used.

• Even when all safety measures are taken, some re-

maining hazards which are not yet evident may still

be present.

• Remaining hazards can be minimized by following

the safety instructions as well as the instructions in

the chapter Authorized use and in the entire operat-

ing manual.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Release the handle button and switch off the ma-

chine prior to any operations.

• Avoid accidental starts of the machine: Do not

press the start button while inserting the plug into

the socket.

• Use the tools recommended in this manual to ob-

tain the best results from your machine.

• Always keep hands away from the work area when

the machine is running.

7. Technical data

Dimensions

L x W x H mm 1160 x 425 x 610

Wood ø max cm 5 - 25

Wood length

max cm 52

Weight without base frame (kg) 59

Weight with base frame (kg) 64

Motor V/Hz 230/50

Input P1 W 2200

Output P2 W 1700

Rating S3 25%

Splitting Power t max. 6,5

Cylinder rise mm 370

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL660 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info