Bedienungsanleitung Scheppach HSM3500 (Seite 28 von 92) (Deutsch, Englisch, Französisch, Spanisch)

781910

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

28 | GB

• Protect the diamond cutting wheel from impact and

jarring. Do not subject it to any lateral pressure.

• Do not stress the device to the extent that it is

brought to a stop.

• Wear suitable personal protective equipment

(PPE).

- Hearing protection to avoid the risk of becoming

hearing impaired.

Attention! Noise can be harmful to the

health. If the permissible noise level of 80

dB(A) is exceeded, hearing protection must

be worn.

- Respiratory protection to avoid the risk of inhal-

ing harmful dust.

- Eye protection to avoid the risk of injuring the

eyes.

- Gloves are recommended when handling raw

materials and shoes with non-slip soles when

working outdoors.

• Diamond cutting wheels must always be carried in

a container whenever practical.

• This machine may only be operated by persons

who are familiar with stone cutting machines.

• Errors in the machine, including all covers and

protective devices must be reported to the person

responsible for safety as soon as they are discov-

ered.

• Do not leave the device running unattended.

7. Other safety instructions

Please read all the instructions before using this

product!

Workplace

To rule out the risk of physical injury, machine dam-

age, re and electric shock, please ensure that your

workplace is protected

• against humidity, wetness and rain,

• It is free of Inammable gases and liquids,

• It is protected from children – use padlocks and

the master switch when the machine is not in use;

• It is clean and empty,

• It is well-ventilated and illuminated.

The operators

Healthy commonsense and caution are factors that

cannot be integrated in a machine. These factors are

the responsibility of the operator. Please consider the

following:

Prevent body contact with grounded surfaces such

as pipes and radiators.

Please be watchful. Do not work at the machine if

you are tired.

Do not operate the product under the inuence of

alcohol or drugs. Read the warning instructions to

determine whether your judgement or your reexes

could be affected.

• Always ll the tube with water before working.

• The machine may only be operated in sufciently

ventilated rooms.

• Attention! Never leave the motor running in closed

or spatially-constrained rooms. The exhaust gases

contain toxic carbon monoxide!

• As a basic rule, switch on the equipment before

material contact.

• The elevated safety regulations for wet operation

apply for this stone cutting machine. All safety

measures to prevent elevated contact voltages

must be applied.

• Electrical cable wires may not come into contact

with water or water vapour.

• Before commencing work, check the equipment

and mains cable for damage.

• Check whether the moving parts function faultless-

ly and do not jam and make sure that no parts are

damaged.

• The mains voltage must match the specications

on the type plate of the machine.

• Only use approved extension cables for use out-

doors.

• When using a cable reel, completely unwind the

cable in order to prevent the cable from heating up.

• When working outside, the electrical outlet must be

equipped with a residual current circuit breaker.

• Observe the motor and diamond cutting wheel di-

rection of rotation.

• Only cut one workpiece at a time.

• The cut path must be kept of obstacles above and

below.

• Make sure that you can remove cut workpieces

from the cutting wheel from the side in order to en-

sure that avoid becoming entangled.

• Use a push rod in order to guide the workpiece

safely past the cutting wheel.

• Only work with diamond cutting wheels which are

exclusively suitable for wet cutting.

• Use diamond cutting wheels which are the correct

size.

• Keep you hands, ngers and arms away from the

rotating cutting wheel. Always maintain sufcient

clearance from the diamond cutting wheel.

• Replace faulty diamond cutting wheels immediate-

ly. Deformed or cracked cutting wheels may not be

used.

• Only use diamond cutting wheels recommended

by the manufacturer which conform to EN 13236.

The use of any type of saw blades is prohibited.

• Make sure that a suitable diamond cutting wheel

for the material to be cut is selected.

• Do not use the stone cutting machine without safe-

ty equipment.

• Always switch off the machine and pull out the

mains plug for the correction of errors or removal

of jammed workpieces. Only remove the jammed

workpiece after doing so.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HSM3500 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info