Bedienungsanleitung Scheppach PL75 (Seite 16 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch)

644549

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

16 GB

king conditions and the work being performed.

The use of power tools other than those intended for

the tool itself can lead to dangerous situations.

5) Service

a) Only let qualied service personnel repair your tool

and always use original replacement parts. This gua-

rantees that the power tool remains safe to use.

6. Safety instructions for all saws

a) DANGER: Do not put your hands in the sawing area or

on the saw blade. Keep your second hand on the extra

handle of the motor housing. If both hands are holding

the saw, neither can be injured by the saw blade.

One-handed operation is permitted only in conjunction

with rail and anti-tilt.

b) Do not put your hands under the work piece. The pro-

tective cap cannot protect your hands from the blade

when they are under the work piece.

c) Adjust the cutting depth to the thickness of the work

piece. Less than one complete sawing tooth should

be visible under the work piece.

d) Never hold the work piece that is to be sawn in your

hand or over your leg. Make sure that the work piece

has a stable balance. It is important that the work pi-

ece is held securely, in order to minimize the danger

of contact of a body part with the saw, loss of control

over the saw, or jamming of the blade.

e) Hold the equipment on the insulated handles, when

you undertake work in which the tool being used could

come into contact with hidden electrical wires, or its

own cable. Contact with a live power source can elec-

trify the metal parts of the tool and lead to an electri-

cal shock.

f) When making a long cut, always use a stop chock

or a straightedge. This improves the accuracy of the

cut and reduces the chance that the saw blade jams.

g) Always use the correct size of saw blades and ma-

ke sure they have the right locating bore (e.g. Star

shaped or round). Saw blades that do not t the as-

sembly of the saw do not run correctly and cause loss

of control.

h) Never use damaged or incorrect saw blade shims

or screws.

The saw blade shims and screws are designed espe-

cially for your saw, for optimal performance and ope-

rating safety.

7. Additional safety instructions for all

saws

Causes and prevention of kickbacks:

• A kickback is a sudden reaction due to a caught, jam-

med or incorrectly adjusted saw blade, which leads

to the saw rearing up in an uncontrolled manner and

moving out of the work piece towards the operator.

• If a saw blade catches or jams in the sawing edge that

closes behind it, it is blocked and motor’s drive pushes

the saw back in the direction of the operator.

• If the saw blade twists in the saw groove or is incor-

rectly positioned, the teeth at the rear side of the saw

blade edge catch in the surface of the work piece. The

saw then moves out of the saw groove and springs

back in the direction of the operator.

• A kickback results from an incorrect or faulty use of the

saw. It can be prevented, as will be described in the

following, by appropriate cautionary measures.

a) Hold onto the saw with both hands and position your

arms so that they can absorb any energy from a kick-

back. Always keep to the side of the saw blade, and

never bring it into line with your body. In the case of

a kickback, the circular saw can jump backwards, but

with adequate caution the operator can deal with the

energy of the kickback.

b) If the saw blade jams or you want to interrupt your

work, then turn the saw off and keep the work piece

still until the saw blade comes to a full stop. Never

try to remove the saw from the work piece or pull it

out when the saw blade is moving since then a kick-

back can occur. Find out the cause of the jam and

remove it.

c) If you want to start up a saw that is in the work piece,

centre the saw blade in the sawed groove and check

that the saw blade teeth are not caught in the work pi-

ece. If the saw blade is jammed, it can jump out of the

work piece or cause a kick back when it is started up.

d) Support larger work pieces in order to reduce the risk

of a kick back due to a saw blade jam. The weight of

larger work pieces can cause them to bend. Large pi-

eces must be supported on both sides, both near the

sawing slot as well as on the edges.

e) Do not use dull or damaged saw blades. Saw blades

with dull or misaligned teeth increase the friction, in

the sawing slot, cause saw blade jams and kickbacks.

f) Before you start sawing, tighten the adjustments for

the cut depth and angles. If you change settings while

sawing, the saw blade can jam and a kickback is the

result.

g) Be particularly careful when making “inserted cuts”

in walls that already exist or other areas where you

cannot see what is behind the surface. When the saw

blade is inserted into the wall it can be blocked by hid-

den objects and cause a kick back.

8. Safety instructions for inserted circu-

lar saw use

a) Each time before you use the saw, make sure that

the protective covering closes. Do not use the saw if

the protective covering cannot move freely and does

not close immediately. Never clip or tie the protective

covering in an opened position. If the saw should ac-

cidentally fall to the ground, the protective covering

can get bent. Make sure that the protective covering

can move freely and does not touch the saw blade or

other parts in all cutting positions.

b) Check the condition and function of the spring for

Scheppach PL75 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scheppach PL75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info