758983

Sencor SPR 4000 Seite 12

12
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
- 12 - 06/2019
Copyright © 2019, Fast ČR, a.s.
off and four dashes will be shown on the display. Now it is possible
to open the lid and add or remove ingredients, etc.
Note:
This function is available for the Stew, Meat and Soup
programs.
COOKING WITH AN OPEN LID
■ Rotate the handle A9 to symbol and open the lid using button
A3. The display will show “OPEN” and the unlocked lid indicator
B12 will be lit.
■
On the open lid, rotate the handle A9 towards the symbol . The
display will show four dashes and the unlocked lid indicator B12
will be lit.
■ Select acooking program using button B17 (Menu).
■
To set the temperature, press button B3 (Manual), then B7
(Temperature) and use buttons B6 (minus) and B18 (plus) to set
the desired value.
■ To set the time, press button B19 (Cooking Time) and use buttons
B6 (minus) and B18 (plus) to set the desired value.
■
Press button B15 (Start). The cooking process will start even with
the lid open.
DELAYED COOKING FUNCTION
■
The delayed cooking function enables you to start cooking at atime
of your choosing. The minimum delay time is 10 minutes and the
maximum delay time is 24 hours.
Note:
This function is not available for the programs FRY,
YOGHURT, DESSERTS and CAKE.
■
Select acooking program and press button B16 (Preset). The minutes
indicator will start flashing. Using buttons B6 (minus) and B18 (plus)
set the minute value for delayed cooking.
■ To set the hours, again press button B16 (Preset) and use buttons
B6 (minus) and B18 (plus) to set the hours value.
■
Press button B15 (Start) to start the countdown. Indicators B8
(Manual), B9 (Preset) and B10 (Countdown) will be lit. As soon as
the time you set elapses, the pressure cooker will start the cooking
process.
KEEP WARM FUNCTION
■
The Keep warm function will keep food warm at apreset temperature
for up to 24 hours.
■
The function will start automatically when the pressure cooker
finishes the cooking process. The display will show the time 00:00
and the timer will start counting up in minutes.
■
The function can be started at any time by pressing button B2
(Cancel/Keep warm).
TURNING OFF THE PRESSURE COOKER
■ To completely turn off the pressure cooker, disconnect the power
cord A15 from the power socket.
CLEANING AND MAINTENANCE
Attention:
Apart from the removable pot A10, no part of
the pressure cooker is intended to be washed in
adishwasher.
The pressure cooker unit A4 is not intended to be
washed under awater tap. Do not spray the pressure
cooker unit or the power cord with water or any
another liquid, or submerge it in water or another
liquid.
Attention:
Never use chemicals, cookware scrubbers, steel wool,
or abrasive cleaning agents to clean the outside of the
pressure cooker unit A4 or the inside of the inner pot
A11 as this could damage the surface of the pressure
cooker unit or the inner pot.
■
Before cleaning, always disconnect the power cord A15 of the
pressure cooker from the mains power supply and pull it out of
the socket of the pressure cooker. Before removing the lid A1 and
taking out the inner pot A10, always leave the pressure cooker to
cool down completely.
REMOVABLE INNER POT AND ACCESSORIES
■
Wash the removable inner pot A10 in hot water with detergent, rinse
it and dry it thoroughly. If there are baked on food remains inside the
inner pot, then first allow it to soak for 20-30minutes in hot water
with detergent. The food remains can then be easily removed using
asoft kitchen brush. The pot can also be washed in adishwasher.
Note:
The colour of the inside surface of the inner pot A10 may
change during use. This is normal and in no way changes
the properties of the surface.
■ Wash the accessories A16 to A19 in hot water with detergent, rinse
them and dry them thoroughly.
PRESSURE COOKER UNIT AND THE BUILT-IN OUTER POT
■ Clean the outer surface of the pressure cooker unit A4 using asoft,
damp cloth and wipe it dry using adry wiping cloth.
■
Wipe the inside of the built-in outer pot A11 with alightly dampened,
soft wiping cloth and then wipe it dry using adry, clean wiping cloth.
■
Wipe the display using asoft sponge lightly dampened in warm
water. Adry sponge or cleaning agents could scratch the surface.
■ Carefully pull out the water condensate tank G1. Wash it in warm
water with asmall amount of kitchen detergent. Rinse it with clean
water, wipe it dry and put it back in its place.
LID OF THE REMOVABLE POT
■
Pull on the steam valve cover C3 to remove the lid of the removable
pot out of the pressure cooker unit. Push the cover out of the hole
of the lid body C1.
■
Gently pull the gasket C2 around the entire perimeter to remove
it from the lid body.
■
Wash the lid body in hot water with standard detergent, remove any
food remains using afine brush, rinse with clean water and wipe it
dry. Carefully wash the gasket and the cover in warm water with
asmall amount of kitchen detergent. Rinse with clean water and
wipe thoroughly until dry. Return the gasket and the cover back in
their place in reverse sequence.
■
If the gasket or the cover are worn out or damaged, contact the
supplier, who will order the respective part for you.
INNER PARTS OF THE PRESSURE COOKER LID
■ After removing the lid of the removable pot, also clean the bottom
(inner) part of the pressure cooker lid. Clean the surfaces of the lid
using asoft damp cloth or suitable soft brush.
■ Check the valves D1, D2 and D3 and the temperature sensor D4 for
soiling and if necessary carefully clean these parts using asoft brush.
Carefully pull the gaskets off the valves D1 and D2 and wash them
in hot water with detergent, rinse and dry them thoroughly. Return
both gaskets to their place.
Attention:
Never use the pressure cooker without the float valve
gaskets or if the gaskets are damaged.
OUTER PARTS OF THE PRESSURE COOKER LID
■ Clean the outer parts of the pressure cooker lid using asoft, damp
cloth and wipe it dry using adry wiping cloth.
■ Pull upwards to remove the cover A8 and cover E1 of the outer part
of the steam release valve E2.
■ Use adamp wiping cloth to clean the contact surfaces of the cover
A8 including the hole E3. Use asoft brush to clean the outer parts of
the steam release valve E2 and dry it using adry wiping cloth. Slide
the cover E1 back on to the outer part of the valve.
… 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SPR 4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info