Bedienungsanleitung Snooper S6-R Neo (Seite 16 von 20) (Englisch)

619691

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

3. S6-RLD External Installation

As the S6-RLD is waterproof it can be mounted outside the vehicle with

the ’L’ shaped bracket, water resistant double-sided tape and screw pack

provided.

- Find a suitable mounting position for the detector, ensuring that the front

of the unit has a clear view of the road ahead and is unobstructed by any

metallic objects and that there is a sufficient mounting area to attach the

’L’ shaped fixing bracket. The S6-RLD needs to be mounted in as

horizontal a position as possible so that it is looking directly down the

road ahead but can be mounted either flat or on it’s side if necessary.

We recommend that you mount the detector either behind the vehicles

grille (If the openings of the grille are at least 10mm in diameter) or within

an air intake at the front of the vehicle. The S6-RLD can be mounted

anywhere at the front of the vehicle, but for optimum performance we

suggest you mount it as close to the number plate of the vehicle as

possible.

- When you have found a suitable location, using the ’L’ shaped mounting

bracket as a template, drill between 2 and 4 pilot holes into the selected

mounting surface for attaching the bracket using either the self-tapping

screws or the nuts and bolts provided.

You will need to attach the bracket using

at least 2 screws or 2 nuts and bolts to

ensure that the bracket is well secured.

Remember that there is a lot of

vibration within the engine bay

so it is very important that the

S6-RLD mounting bracket is

secured correctly.

Typical Fitting

10mm

Minimum

Typical Fitting

and press the button below ’Select’ (5).

Then using the buttons below the

arrows on the display, highlight your

desired setting, either ’ON’ or ’OFF’.

Once you have made your choice

press the ’Select’ button. If you are

turning the setting ’ON’ the screen

will either display a factory default

speed or your previous speed selection.

Use the arrows to increase or decrease

the speed to your desired setting and press ’Select’. The screen will read

’SETTING CONFIRMED’ to confirm your selection and will return to the

Menu screen.

Note: To return to the Menu screen from the Sub Menu screen, press the

button below ’Back’ (2) on the display. To return to the Standby screen from

the Menu screen press the same button, which will now say Cancel . If no

buttons are pressed on the device for a period of five seconds the screen

will automatically return to the Standby display.

Please note that there could be a satellite delay of one or two seconds,

therefore the speed indicated by the device may be different to your

actual speed. Always check your speedometer for confirmation of your

vehicles speed.

5. Speed measurement type

This feature allows you to select between MPH and KMH. The device

comes with MPH turned on as the factory default setting. To change this

setting, please refer to the following instructions.

From the Standby screen press the

button below ’Menu’ on the LCD

display and then using the buttons

below the Up (3) and Down (4)

arrows, scroll the display until ’

SPEED MEASURE is highlighted

and press ’Select’ (5). Then using

the buttons below the arrows on the

display, highlight your desired setting,

either ’MPH’ or ’KMH’. Once you have

made your choice press the ’Select’ button.

The screen will read ’SETTING CONFIRMED’ to confirm your selection

and will return to the Menu screen.

Note: To return to the Menu screen from the Sub Menu screen, press

the button below ’Back’ (2) on the display. To return to the Standby

screen from the Menu screen press the same button, which will now say

Cancel . If no buttons are pressed on the device for a period of five

seconds the screen will automatically return to the Standby display.

2 3 4 5

SPEED : 30MPH

SUB MENU

2 3 4 5

MPH

KMH

BACK

SELECT

BACK

SELECT

SUB MENU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper S6-R Neo Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info