Bedienungsanleitung Spektrum DX8 (Seite 22 von 42) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite





The DX8 organizes the programming screens in two separate categories: System

Setup Mode and Functions Mode. Function Mode programming adjusts a

model’s ﬂight characteristics at the ﬁeld.

 

Servo Setup page 22 Servo Setup page 22

D/R and Exponential page 23 D/R and Exponential page 23

Differential page 24 Throttle Cut page 25

Throttle Cut page 25 Throttle Curve page 26

Throttle Curve page 25 Swashplate page 27

Flap System page 26 Governor page 28

Mixing page 29 Pitch Curve page 28

Aileron to Rudder Mix page 29

Tail Curve- For Non-Heading

Programmable Mixes page 29 Hold Gyro Use Only page 30

Timer page 33 Mixing page 31

Monitor page 35 Gyro page 33

Timer page 33

Monitor page 35



With the transmitter on and the main or telemetry screen displayed, press the

roller. The Function list displays.



Highlight the desired function then press the roller to access that function. The

selected function screen appears:



Servo Setup adjusts the servo reverse, travel adjust, sub-trim and servo speed for

all eight channels. Servo Setup screens feature a servo monitor that allows easy

visual reference when making adjustments.

 - Allows the adjustment of servo throw/travel in each direction

 - Typically used to center the servo position

 - Changes the direction of the servo/channel

Speed - Adjusts individual servo speed



With the transmitter on and the main or telemetry screen up, press the roller. The

Function list displays. Rotate the roller to highlight Servo Setup then press. Servo

travel will automatically be highlighted. Press to enter the Travel function.

Highlight the channel then press the roller. Rotate the roller to access the channel

you wish to adjust then press to accept.

Highlight the values at the bottom of the screen. When you center the

corresponding stick both values are highlighted and will adjust simultaneously.

Moving the stick or switch in the desired position adjusts that direction of travel

independently. With the desired value(s) highlighted, rotate the roller to adjust the

travel for the selected channel. Then press to accept.



With the transmitter on and the main or telemetry screen up, press the roller. The

Function list displays. Rotate the roller to highlight Servo Setup then press. Servo

travel will automatically be highlighted. Rotate the roller until Sub-Trim appears in

the channel position then press to enter the function.

Highlight the channel then press the roller. Rotate the roller to access the channel

you wish to adjust. Press to accept.

Highlight the value at the bottom of the screen then press the roller to access the

Sub-Trim Value. Rotate the roller to adjust the Sub-Trim value for the selected

channel. Then press to accept.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info