Bedienungsanleitung Stiga SP 375Q (Seite 38 von 460) (Alle Sprachen)

608366

Zoom out

Zoom in

Vorherige Seite

1/460

Nächste Seite

During the first period of use

(or after replacing the chain), it must be checked

more frequently due to settling of the chain.

Never work with the chain

loose, as it can be hazardous if the chain slips

out of its guides.

To adjust the chain tension, follow the instructions

in Chapter 5.5.

• Checking the oil delivery

Never use the machine with-

out lubrication! The oil tank may get almost empty

every time the fuel runs out. Make sure you top up

the oil tank every time you refuel the chain-saw.

Make sure the bar and the

chain are in place when you check the oil de-

livery.

Start the engine, keep it running at medium power

and check if the chain oil is delivered as shown in

the figure (Fig. 12).

You can adjust the chain oil flow using a screw-

driver on the adjuster screw (1 or 1a) of the oiler,

which is on the bottom of the machine (Fig. 12).

2. DIRECTIONS FOR USE AND CUTTING

TECHNIQUES

Before felling or delimbing for the first time, practise

sawing logs on the ground or on trestles, so that

you can get familiar with the machine and the most

suitable sawing techniques.

When running, the ma-

chine must always be firmly held in both

hands, with the left hand on the front handgrip

and the right hand on the rear handgrip, even

if the operator is left-handed.

IMPORTANT

WARNING!

IMPORTANT

Always remember that an in-

correctly used chain-saw may disturb others and

have a serious impact on the environment.

To respect people and the environment:

– Avoid using the machine in environments or at

times of the day when it may disturb others.

– Scrupulously comply with local regulations and

provisions for the disposal of waste materials

after sawing.

– Scrupulously comply with local regulations and

provisions for the disposal of oils, damaged parts

or any elements which have a strong impact on

the environment.

– A certain amount of chain lubricating oil is rele-

ased into the environment when the machine is

running, so only use biodegradable oils made

specifically for this use.

– To avoid the risk of fire, do not leave the machi-

ne with the engine hot on leaves or dry grass.

Always wear suitable clo-

thing when using the machine. Your dealer

can provide you with all the information on

the most suitable accident-prevention devices

to guarantee your safety. Wear anti-vibration

gloves. All the above-mentioned precautions

do not however guarantee the prevention of

certain risks – i.e. Raynaud’s phenomenon or

Carpal tunnel syndrome. For operators who

use this machine for prolonged periods, it is

therefore recommended to have periodic

check-ups on the hands and fingers.

If any of the above mentioned symptoms

should appear, please contact a physician im-

mediately.

It takes specific training

to use the machine for felling and delimbing.

1. CHECKS DURING WORK

• Checking the chain tension

The chain tends to stretch gradually as you work,

so you need to check its tension frequently.

WARNING!

IMPORTANT

WARNING!

12 USING THE MACHINE

7. USING THE MACHINE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga SP 375Q Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info