Bedienungsanleitung Toolson DKS1600 (Seite 21 von 240) (Alle Sprachen)

782195

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

21GB

4. Supplied package

• Open the packaging and take out the equipment

with care.

• Remove the packaging material and any packaging

and/or transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for trans-

port damage.

• If possible, please keep the packaging until the end

of the guarantee period.

Important

The equipment and packaging material are not toys.

Do not let children play with plastic bags, foils or small

parts. There is a danger of swallowing or suffocating!

• Fretsaw

• Saw blade guard

• Blow-off device

• Spare saw blade (2x) (for wood and plastics)

• Allen key, 3 mm

• Original operating instructions

5. Proper use

The fretsaw was designed to cut square-edged tim-

ber or other workpieces such as Plexiglas, glass ber

reinforced plastic, foam, rubber, leather, and cork. Do

not use this saw to cut round materials. Round mate-

rials can easily become jammed. Risk of injury! Parts

can be catapulted!

The equipment may only be used for the tasks it is

designed to handle. Any other use is deemed to be a

case of misuse. The user/operator and not the manu-

facturer will be liable for any damage or injuries of any

kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

• The equipment is to be operated only with suitable

saw blades. It is prohibited to use any type of cut-

ting-off wheel.

• To use the equipment properly you must also ob-

serve the safety information, the assembly instruc-

tions and the operating instructions to be found in

this manual.

• All persons who use and service the equipment

have to be acquainted with these operating instruc-

tions and must be informed about the equipment’s

potential hazards.

• It is also imperative to observe the accident preven-

tion regulations in force in your area.

• The same applies for the general rules of health

and safety at work.

• The manufacturer will not be liable for any changes

made to the equipment nor for any damage result-

ing from such changes.

Residual risks

Even if you use this electric power tool in accordance

to instructions, certain residual risks cannot be elimi-

nated. The following hazards may arise in connection

with the equipment’s construction and layout:

• Lung damage if no suitable protective dust mask

is applied

• Damage to hearing if no suitable ear protection is

applied

• Contact with the blade in the uncovered cutting

zone

• Injuries (cuts) when changing the blade

• Crushed ngers

• Kickback

• Tilting of the workpiece due to inadequate support

• Touching the blade

• Catapulting of pieces of timber and workpieces

6. Technical data

Mains voltage: 220-240 V~/50 Hz

Power input: 80 Watt (S1) 120 Watt

(S6 30%)

Stroke rate: 500-1700 min-1

Protection type: IP 20

Stroke: 12 mm

Base area: 630 x 295 mm

Tilting range of table: 0° - 45°

Table size: 415 x 255 mm

Length of saw blade

approx.:

134 mm

Reach: 406 mm

Max. cutting height at

90°:

50 mm

Max. cutting height at

45°:

22 mm

minimum size work

piece wxh:

100 x 22 mm

maximum size work

piece wxh:

400 x 50 mm

Weight: 12,7 kg

Operating mode S6 30%:

Continuous operation with idling (cycle time 10 min-

utes). To ensure that the motor does not become ex-

cessively hot, it may only be operated for 30% of the

cycle at the specied rating and must then be allowed

to idle for 70% of the cycle.

Noise emission values

Sound

Sound values were measured in accordance with EN

61029.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toolson DKS1600 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info