Bedienungsanleitung Vonroc CR506AC (Seite 6 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

819186

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

WWW.VONROC.COM

• Transport the compressor by lifting it or by

using the special grips or handles.

• Children and animals should be kept far away

from the area of operation of the machine.

• If you use the compressor to spray paint:

a) Do not work in enclosed spaces or near

naked ﬂames.

b) Make sure that the environment in which you

will be working has dedicated ventilation.

Protect your nose and mouth with a dedicated

mask.

• Do not use the compressor when the electrical

cable or the plug is damaged, and instruct an

authorised Support Service to replace them

with an original part.

• When the compressor is placed on a surface

higher than the ﬂoor, it should be secured to

prevent it from falling down during operation.

• Do not put objects or your hands in the pro-

tective covers to avoid physical damage and

damage to the compressor.

• Do not use the compressor as a blunt instru-

ment against persons, objects or animals in

order to prevent serious damage.

• If the compressor is no longer in use, always

take the plug out of the plug socket.

• Always make sure that compressed-air hoses

are used for compressed air and which are

characterised by a maximum pressure adjusted

to that of the compressor. Do not try to repair

the hose if it is damaged.

SAFETY INSTRUCTIONS FOR WORKING WITH

COMPRESSED AIR GUNS

• The compressor and hoses can get very hot du-

ring operation. Touching them can cause burns.

• The gases or vapours sucked in by the com-

pressor intake must be kept free of admixtures

that could lead to ﬁres or explosions inside the

compressor.

• When removing the hose coupling, always hold

the hose coupling ﬁrmly to avoid injury caused

by the hose ﬂying off.

• When working with the blow-out gun, wear

goggles. Foreign bodies and blown out particles

can easily cause injuries.

• Do not direct the blow-out gun at people or use

it to clean clothing you are wearing.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of ﬁre, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating plate.

Connecting to the power supply

Check that the power supply and plug used in

accordance with your machine. Have a look at the

rating plate on the machine. Any changes should

always be carried out by a qualiﬁed electrician.

Warning! This machine must be earthed. If

not properly earthed this machine can cause

an electrical shock. Be sure that the power

supply outlet is earthed. If there is any doubt,

have it checked by a qualiﬁed electrician.

Warning! Avoid contact with the terminals

on the plug when installing (removing) the

plug to (from) the power supply outlet.

Contact will cause a severe electrical shock.

Replacing cables or plugs

If the replacement of the supply cord is necessary,

this has to be done by the manufacturer or his

agent in order to avoid a safety hazard. Immedi-

ately throw away old cables or plugs when they

have been replaced by new ones. It is dangerous to

insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm2. When using a cable reel

always unwind the reel completely.

2. MACHINE INFORMATION

Intended use

The compressor is designed to generate compressed

air for compressed air driven tools. This compressor

is not designed for continuous operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CR506AC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info