Bedienungsanleitung Webasto Pure II (Seite 17 von 379) (Alle Sprachen)

802209

Zoom out

Zoom in

Vorherige Seite

1/379

Nächste Seite

5110757E OI II Webasto Pure 5

7Required tools

Tool description Amount

Slot-head screwdriver 0.5x3.5mm 1

Torx screwdriver Tx25 1

Torx screwdriver Tx10 1

Torque wrench (range covers 5-6Nm, for

Tx25)

Torque wrench (range covers 4-5Nm, for

open-ended spanner size 29)

Drilling machine with 8 mm drill 1

Hammer 1

Measuring tape 1

Spirit level 1

Wire stripping tool 1

Installation tester 1

EV simulator with rotary field display 1

Round file 1

Combination pliers 1

8Installation and electrical

connection

DANGER

Observe the safety information provided here

chapter2, "Safety" on page 1.

To access further documents use one of the following

options:

Webasto Service app (for installation)

To download this app:

uscan the QR code below or

ugo to:

https://apps.apple.com/ (Apple App Store) or

https://play.google.com/ (Google Play Store) as ap-

propriate.

To use the Webasto Service App and access online

Webasto technical documentation, please scan the QR

code or the barcode on your Webasto product box.

You can find our operating instructions on the Webasto

website at:

https://charging.webasto.com/int/products/

documentation

All languages can be found in the download portal on

our website.

NOTE

The Webasto Pure safety concept is based on a power

supply system that is earthed at all times, which must

always be ensured by an electrician during installa-

tion.

8.1 Requirements installation space

The following points must be take into account when se-

lecting the installation location for the Webasto Pure:

– The lower edge of the enclosed mounting template

must be a minimum distance of 90cm above the

ground during installation. (See Fig. 14)

– If several charging stations are installed next to each

other, a spacing of at least 200 mm must be main-

tained between each station.

– The mounting surface must be solid and strong.

– The mounting surface must be completely flat (max. 1

mm difference between the individual mounting

points).

– The mounting surface must not contain any flam-

mable substances.

– A cable run from the charging station to the vehicle as

short as possible.

– No risk of driving over the charging cable.

– Possible electrical connections from infrastructure.

– Pavements and escape routes must not be obstructed.

– We recommend an installation location that is protec-

ted against direct sunlight for optimum and fault-free

operation.

– The usual parked position of the vehicle, taking ac-

count of the position of the charging plug on the

vehicle.

– Consideration of local building and fire protection reg-

ulations.

NOTE

The mounting distance between the bottom edge of

the charging station and the floor must be at least 0.9

8.2 Criteria for the electrical connection

The maximum charging current is factory set and is indic-

ated on the type label of the charging station. The max-

imum charging current can be reduced to the value of

the installed circuit breaker using DIP switches.

NOTE

The current value of the selected protective device

must not fall below the current value specified on the

type label for the charging station or the value set us-

ing the DIP switch.

See chapter8.6, "DIP switch settings" on page 7.

The installation requirements for the charging station

should be checked by a qualified electrician before start-

ing connection works.

Comply with the nationally applicable regulations of the

authorities and power supply companies, e.g. registration

of installation of a charging station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Pure II Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info