Bedienungsanleitung Yamaha S90ES (Seite 181 von 204) (Englisch)

587008

181

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

About MIDI

181

Owner’s Manual

Appendix

Modulation Wheel (Control Change #001)

The MIDI data produced when a modulation wheel is

operated. Setting the value to 127 produces maximum

vibrato and 0 results in vibrato off.

Portamento Time (Control Change #005)

Messages which control the duration of portamento, or a

continuous pitch glide between successively played notes.

Setting the value to 127 produces maximum portamento

time and 0 results in minimum portamento time. When the

parameter Portamento Switch (Control Change #065) is set

to on, the value set here can adjust the speed of pitch

change.

Data Entry MSB (Control Change #006)

Data Entry LSB (Control Change #038)

Messages which set the value for the parameter speciﬁed

by RPN MSB/LSB (page 182) and NRPN MSB/LSB (page

182). The value is represented by two control change data

numbers — the MSB and the LSB.

Main Volume (Control Change #007)

Sets the volume for each individual part. Setting the value

to 127 produces maximum volume and 0 results in volume

off.

Pan (Control Change #010)

Messages which control the stereo panning position of

each Part (for stereo output). Setting the value to 127

positions the sound to the far right and 0 positions the

sound to the far left.

Expression (Control Change #011)

Messages which control intonation expression of each Part

during performance. Setting the value to 127 produces

maximum volume and 0 results in volume off.

Hold1 (Control Change #064)

Messages which control sustain on/off. Notes playing when

the pedal is pressed will be sustained. Setting the value

between 64 - 127 turns the sustain on, between 0 - 63 turns

the sustain off. While sustain is on, notes currently playing

will be sustained, even if Note Off messages are received.

n The Half Damper function lets you ﬁnely control the length of

sustain over a range of 1 - 127, according to the depth at which

you press a continuous foot pedal.

Portamento (Control Change #065)

Messages which control portamento on/off. Setting the

value between 64 –127 turns the portamento on, and

between 0 - 63 turns the portamento off.

If portamento is turned on and the Mono/Poly parameter is

set to “mono,” expressive legato play is possible. In other

words, when you play one note before releasing the next,

the pitch will glide smoothly from note to note, and the

envelopes (PEG, FEG and AEG) will stay in effect from note

to note — mimicking the natural behavior of acoustic

instruments. The speed of the pitch glide is determined by

the portamento time (Control Change #005).

Sostenuto Pedal (Control Change #066)

Messages which control sostenuto on/off. Setting the value

between 64 –127 turns the sostenuto on, between 0 - 63

turns the sostenuto off.

Holding speciﬁc notes and then pressing and holding the

sostenuto pedal will sustain those notes as you play

subsequent notes, until the pedal is released.

Harmonic Content (Control Change #071)

Messages which adjust the ﬁlter resonance set for each

Part. The value set here is an offset value which will be

added to or subtracted from the voice data.

Release Time (Control Change #072)

Messages which adjust the AEG release time set for each

Part. The value set here is an offset value which will be

added to or subtracted from the voice data.

Attack Time (Control Change #073)

Messages which adjust the AEG attack time set for each

Part. The value set here is an offset value which will be

added to or subtracted from the voice data.

Brightness (Control Change #074)

Messages which adjust the ﬁlter cutoff frequency set for

each Part. The value set here is an offset value which will

be added to or subtracted from the voice data.

Decay Time (Control Change #075)

Messages which adjust the AEG decay time set for each

Part. The value set here is an offset value which will be

added to or subtracted from the voice data.

Effect Send Level 1 (Reverb Depth)

(Control Change #091)

Speciﬁes the reverb effect send level.

Effect3 Send Level 3 (Chorus Depth)

(Control Change #093)

Messages which adjust the send level for the Chorus

effect.

Data Increment (Control Change #096)

Data Decrement (Control Change #097)

Messages which increase or decrease the MSB value of

pitch bend sensitivity, ﬁne tune, or coarse tune in steps of

1. You will need to assign one of those parameters using

the RPN in the external device in advance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S90ES Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S90ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info