Bedienungsanleitung Zelmer 13Z011 (Seite 212 von 228) (Englisch, Polnisch)

538892

212

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

212

CAUTION! The adjustments can be made only when the grinder is operating. Avoid extreme adjustment settings

(e.g. setting “1” and “8”). The modiﬁ ed grinding level setting can only be noticeable after brewing three or four

espresso cups, as there might still be coffee remains in the grinder from the previous grinder setting.

CAUTION! Never turn the knobs (10) and (11) using force when the grinder is not operating. This may cause dam-

age to the coffee maker.

The bean coffee container is equipped with a built-in “grinding blade protection” which is a safety mechanism. It pro-

tects undesirable objects e.g. ﬁ ngers, etc. from entering the grinder. While using big or oily coffee beans the grinder unit

might be temporarily blocked. In such a case switch off the coffee maker, remove the remaining coffee beans, clean the

bean container and the area around the grinder. However, it is recommended to use medium size and less oily beans for

the proper functioning of the grinder.

7.2. Ground coffee

CAUTION! The ground coffee container can only be ﬁ lled with ground coffee. Never ﬁ ll the bean coffee container

with any other products, as it may cause damage to the appliance.

Open the ground coffee container lid ● (9).

Fill the container ● (9a) with 1 measuring spoon of ground coffee using the measuring spoon with the brush (24).

NOTE! If you accidentally exceed the recommended amount of ground coffee, it will not inﬂ uence the coffee brew-

ing effect. However, try not to ﬁ ll the ground coffee container (9a) with two measuring spoons.

Close the ground coffee container lid ● (9).

8. Cup warming

Using a cup warmed to an appropriate temperature before the coffee brewing proc-

ess will increase the taste of the coffee as well as the formation of a rich froth.

There are 2 ways of warming the cups. The ﬁ rst way is to warm the cup using hot

water which can be obtained from the steam/hot water nozzle (16) proceeding ac-

cording to section 13.

The second way is to place the cup before the planned coffee brewing process on

the warming plate (7) on the top of the coffee maker (ﬁ g. 9).

9. Emptying the drip tray

When the drip tray (19) is full of water, the red drip tray full indicator (20) will rise above the drip tray grill (21).

Remove the drip tray unit (19) together with the drip tray grill (20) from the coffee maker and pour out the water. Reinsert

the elements back to the coffee maker.

10. Emptying the dregs box

Check the dregs box (22) periodically. In order to do so, just observe the box after opening the service door (15). When

the dregs box (22) is full with used coffee, remove the drip tray unit from the coffee maker. Remove the dregs box (22) and

empty its content. Next, rinse the dregs box under running water, dry it and insert it back to the drip tray unit. Reinsert the

elements back to the coffee maker.

NOTE! If the dregs box (22) is full the message EMPTY DREGS BOX will appear on the LCD display.

11. Operating the coﬀ ee maker SELF-TEST

Fill the water tank according to ● section 6.

Check if the brewing head unit ● (14), the dregs box (22) and the drip tray (19) together with the drip tray grill (21) are in

their proper places. If not, assemble these parts properly.

Plug in the appliance. ●

Switch on the appliance by setting the switch in the position ● I.

The appliance will automatically switch to the testing mode. The message ● SELF-TEST will appear on the display dur-

ing test mode. During the appliance test water may drip from the coffee spout (17). This is a normal situation.

When the appliance reaches the appropriate temperature, the message ● READY TO BREW will appear on the display.

12. Preparing coﬀ ee

The appliance is ready to use when the message READY TO BREW appears on the display.

12.1. Preparing a small cup of coffee

Place a cup under the coffee spout (17). Adjust the height of the spout (17) to the size of the cup. Fill the bean coffee con-

tainer (4) or the ground coffee container (9a) with an appropriate type of coffee according to point 7, set the type of coffee

using the button (F) (see section 3F). Make sure there is water in the tank (3). Press the (A) button once. The

message 1 SMALL CUP COFFEE will appear on the display together with the currently set capacity in ml and the brewing

process will start immediately. After ﬁ lling the cup with coffee, the message 1 SMALL CUP COFFEE will disappear from

the display and the message READY TO BREW will appear on the display.

Fig. 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 13Z011 Seite 212

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info