Bedienungsanleitung Casio 3134 (Seite 8 von 15) (Englisch)

466632

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Operation Guide 3134 3205

•If the Moon phase indicator shows a phase that is a mirror image of the

actual moon phase in your area, you can use the procedure under

“Reversing the Displayed Moon Phase” to change it.

To view Moon Data for a particular date, or Tide Data for a

particular date and time

1. In the Tide/Moon Data Mode, use A (+) and

C (–) to select the date you want.

•After you select a date, the watch starts to

calculate Moon and tide data for the date

you selected. The calculation operation

takes about 10 seconds, and is indicated by

movement in the Moon Phase indicator and

the Tide Graph on the display. You can use

A and C to change to another date while

a calculation operation is in progress.

•After calculation is complete, the Moon

information (Moon age and phase) and tide

information (current tide level and tide

range) will be displayed for the date you

selected.

Moon age

Moon

phase

Current

tide level

Current

tide range

2. While the Moon information (Moon age and phase) and tide information

(tide level and tide range for the current date) are displayed, you can press

B (+) to advance the displayed tide range by one hour.

•You also can use A (+) and C (–) to change the date.

•Update of the Moon Phase indicator and the Tide Graph is stopped while

any of the following is occurring.

During button operation

While an alarm is sounding

While a countdown beeper is sounding

During display illumination

During Auto Receive of a time calibration signal

During a 2-hour barometric pressure reading operation

Adjusting the High Tide Time

Use the following procedure to adjust the high tide time within a particular

date. You can find out high tide information for your area from a tide table, the

Internet, or your local newspaper.

To adjust the high tide time

1. In the Tide/Moon Data Mode, use A (+) and

C (–) to select the date you want.

•After you select a date, the watch starts to

calculate Moon and tide data for the date

you selected. The calculation operation

takes about 10 seconds, and is indicated by

movement in the Moon Phase indicator and

the Tide Graph on the display. You can use

A and C to change to another date while

a calculation operation is in progress.

•After calculation is complete, the Moon

information (Moon age and phase) and tide

information (current tide level and tide

range) will be displayed for the date you

selected.

2. While the Moon information (Moon age and

phase) and tide information (current tide level

and tide range) are displayed, hold down E

until the hour digits start to flash. This is the

high tide time hour adjustment screen.

3. Use A (+) and C (–) to change the hour

setting.

4. When the hour is the setting you want, press

•This will cause the minute digits to flash.

5. Use A (+) and C (–) to change the minute

setting.

6. When the minute setting is the way you want,

press E to exit the adjustment screen and

return to the Tide/Moon Data Mode screen.

Hour

Minute

•Pressing A and C at the same time while the time adjustment screen is

displayed (steps 2 through 5 above) will return the high tide time to its initial

factory default setting.

•The high tide time setting is not affected by the DST (summer time) setting

of the Timekeeping Mode.

•On some days, there are two high tides. With this watch, you can adjust the

first high tide time only. The second high tide time for that day is adjusted

automatically based on the first high tide time.

Reversing the Displayed Moon Phase

The left-right (east-west) appearance of the Moon depends on whether the

Moon is north of you (northerly view) or south of you (southerly view) as you

view it.

You can use the procedure below to reverse the displayed Moon phase so it

matches the actual appearance of the Moon where you are located.

•To determine the viewing direction of the Moon, use a compass to take a

direction reading of the Moon at its meridian passage.

•

For information about the Moon phase indicator, see “Moon Phase Indicator”.

To reverse the displayed Moon phase

1. In the Tide/Moon Data Mode, hold down E

until the hour digits start to flash.

2. Press D twice.

•This will cause the Moon phase indicator to

flash. This is the indicator switching screen.

3. Press A to toggle the Moon phase indicator

between the southerly view (indicated by

) and northerly view (indicated by ).

•Northerly view: Moon is north of you.

•Southerly view: Moon is south of you.

4. When the Moon phase indicator setting is the

way you want, press E to exit the switching

screen and return to the Tide/Moon Data

Mode screen.

Countdown Timer

The countdown timer can be set within a range of

one minute to 60 minutes. An alarm sounds when

the timer reaches zero. The press of a button will

start the countdown timer from the currently set

start time, and a progress beeper sounds to keep

you informed of the current status of the

countdown. These features make it possible to

use the watch for yacht racing.

•All of the operations in this section are

performed in the Countdown Timer Mode,

which you enter by pressing D.

Configuring Countdown Timer Settings

The following are the settings you should configure before actually using the

countdown timer.

Countdown start time and reset time

Progress beeper (on/off)

Minutes

Seconds

Current

time

•See “To configure countdown timer settings” for information about setting up

the timer.

•For details about the progress beeper, see “Progress Beeper”.

Reset Time

You can set a “reset time”, which is a kind of alternate countdown start time

you can recall with the press of a button any time a countdown operation is in

progress.

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep

informed about the countdown status without looking at the display. The

following describes the types of beeper operations the watch performs during

a countdown.

Tide/Moon Data

In the Tide/Moon Data Mode, you can see the current tide and the current

date’s Moon phase for your Home City. You can specify a date and view tide

and Moon data for that date.

•See “Moon Phase Indicator” for information about the Moon phase indicator

and “Tide Graph” for information about the tide graph.

•All of the operations in this section are performed in the Tide/Moon Data

Mode.

Tide Data

The Tide Graph that appears first when you enter the Tide/Moon Data Mode

shows the data at 6:00 a.m. for your currently selected Home City on the

current date, according to the Timekeeping Mode. From there you can specify

another date or time.

•If the tide data is not correct, check your Timekeeping Mode settings and

correct them if necessary.

•If you feel that the information shown by the Tide Graph is different from

actual tide conditions, you need to adjust the high tide time. See “Adjusting

the High Tide Time” for more information.

Moon Data

The Moon phase and Moon age information that appears first when you enter

the Tide/Moon Data Mode shows the data at noon for your currently selected

Home City on the current date, according to the Timekeeping Mode. After that

you can specify another date to view data.

•If the Moon data is not correct, check your Timekeeping Mode settings and

correct them if necessary.

Casio 3134 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3134

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info