Bedienungsanleitung Hormann Schuifhekaandrijving (Seite 23 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

538730

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Force learning cycle

A learning cycle during which the necessary forces for moving

the gate are learned.

Normal cycle

Gate movement with the learned travel distances and forces.

Reference cycle

Gate cycle towards the CLOSE end-of-travel position in order

to set the home position.

Reversing cycle

Gate travels in the opposite direction on activation of the

safety devices.

Reversal limit

The reversal limit separates the travel range for reversal from

the range for stopping the gate when the force is cut off in the

CLOSE end-of-travel position.

Slow speed

The area in which the gate moves very slowly, in order to

gently move to the travel limit.

Partial opening

The distance the gate is opened for pedestrian trafﬁc.

Dead man's travel

The gate travels only as long as the respective buttons are

pressed.

Full opening

The travel to completely open the gate.

Advanced warning phase

The time between the travel command (impulse) and the start

of travel.

Factory reset

Resetting the learned values to the delivery status/ex factory

setting

Colour code for cables, single conductors and

components

The abbreviations of the colours for identifying the cables,

conductors and components comply with the international

colour code according to IEC 757:

BK Black PK Pink

BN Brown RD Red

BU Blue SR Silver

GD Gold TQ Turquoise

GN Green VT Violet

GN/YE Green/yellow WH White

GY Grey YE Yellow

OG Orange

Fitting4

Preparation for ﬁtting4.1

WARNING

Danger of injury due to damaged components

Do not use the gate system if repair or adjustment work

must be conducted. A malfunction in the gate system or an

incorrectly aligned gate can cause serious injury.

In addition, check the entire gate system (gate pivots, f

bearings and fastenings) for wear and possible

damage. Check for signs of rust, corrosion or fractures.

Only ever operate the sliding gate when you have full f

view of the movement range of the gate.

Before driving in or out of the gateway, always check f

that the gate has fully opened. Never drive or walk

through gateways unless the entrance gate has

reached the OPEN end-of-travel position.

Before installing the operator and in the interests of personal

safety, make sure that any necessary repairs to the gate

system are carried out by a qualiﬁed specialist.

Only correct ﬁtting and maintenance in compliance with the

instructions by a competent/specialist company or a

competent/qualiﬁed person ensures safe and ﬂawless

operation of the system.

The specialist must ensure that the applicable regulations on

occupational safety, as well as the regulations on the

operation of electrical devices, are followed during assembly

work. The national guidelines must be observed. Possible

hazards are prevented by the design itself and by carrying out

ﬁtting in accordance with our guidelines.

All safety and protective functions must be checked f

monthly to ensure that they are in working order.

Malfunctions and/or defects must be rectiﬁed

immediately if necessary.

Before ﬁtting and operating the gate system:

WARNING

Danger of crushing and shearing at the closing edges

Fingers or limbs may be crushed and severed if caught

between the gate and closing edge while the gate is in

motion.

Never touch the main and secondary closing edges f

while the gate is in motion.

All persons using the gate system must be shown how to f

operate it properly and safely.

Demonstrate and test the mechanical release as well as f

the safety return. To do this, halt the closing gate by

grasping it with both hands. The gate system must

initiate the safety return.

Prior to ﬁtting, deactivate or completely disassemble any f

mechanical locks not needed for power operation of the

sliding gate. This includes in particular any locking

mechanisms connected with the gate lock.

In addition, check that the gate is in a ﬂawless f

mechanical condition, so that it can be easily operated

manually and opens and closes properly (EN 12604).

TR10A059-C RE / 10.2008 23

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hormann Schuifhekaandrijving Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info