the nose. T
therapy
having inhaled.
During the treatment, remain quiet and
relaxed. Breathe regularly and not too
quickly
inhalation shortly
while and then place it again on nose and
mouth.
7) Connect the transformer to the device and then
to the power supply plug payi
the voltage is right.
8) Switch on the device pressing the ON/OFF key
Make sure that the warning light switches on
(blue colour).
During inhalation, the device must
compulsorily remain in vertical position: this
assures its correct operation, as well as the
maximum efficacy of therapy
Immediately interrupt the treatment if you feel
unease during the aerosol-therapy
9)
stop device that disables the device when the
drug is almost finished. Y
device in any moment by pressing the ON/OFF
switch.
IMPORT
As with most equipment for aerosol therapy
at the end of the inhalation treatment, a certain
amount of the pharmaceutical will remain in
the nebulization ampoule: this is perfectly
normal. This amount of pharmaceutical,
also know as residual volume
nebulized.
10)Let the device cool down for some minutes,
turn the device upside down or use an
absorbing cloth to remove the residual
liquid and perform the cleaning procedures
according to paragraph “Cleaning and
maintenance”.
■ REPLACEMENT OF THE
PHARMACEUTICAL AMPOULE
For more efficient treatment, substitute the
medicine cup after every inhalation cycle.
Within the pack you will find ampoules which you
can use for replacement purposes.
Other ampoules can be purchased from your
retailer
■ MICROBIC CONT
In the presence of conditions carrying the risk of
microbial infection and contamination, personal
use of the accessories only is advised (always
consult a doctor).
■ CLEANING
1) Caution! Hot surface!
Before cleaning the device, let it cool
since the transducer heats during the
use.
2) After having disconnected the socket, remove
the cover and empty the tank from any
eventual residuals.
3
disassembling it in any part with a cloth
moistened with water or vinegar
residuals are removed.
4)
a soft cloth soaked with water and neutral
soap (do not clean the main unit by
placing it under running water and pay
attention that no liquid penetrates into
the device).
5) In case of daily use, it is suggested to disinfect
or sterilize the accessories all the days to limit
the risk of infections.
In this case, place all acces
the air connection tube, in boiling water for
10 minutes and then let them dry completely
before reusing them.
6)
for the air connection tube, in boiling water
for 10 minutes also before using the device
for the first time.
7)
use 70% alcohol (or a disinfecting spray with
alcoholic base).
Check that within the device there are not
residual parts of the disinfectant.
8) The device, the tank and all accessories must
be completely dry before using them.
9)
■ TECHNICAL SPECIFICA
•Powersupply:AC230V/DC13,5V
• Operatingconditions:
T
Relative humidity: less than 85%, in absence
of condensate
• Storingconditions:
T
Relative humidity: less than 95%, in absence
of condensate
•Ultrasoundfrequency:1.7MHz
•Nebulizationcapacity:about0.4ml/minute
•Perc
of the particles < 5 µm
•Mediumsizeoftheparticles:3.4µm
•Maximumvolumeoftheinhalingproduct:
max. 8 ml = 8 cc
•Size:235x145x285mm
•W
Device of BF type
Device of second class
Caution: check the instructions for use
■ DISPOSAL PROCEDURE
(DIR. 2002/96/EC - WEEE)
The symbol on the bottom of the device
indicates the separated collection of
electric and electronic equipment.
At the end of life of the device, do not
dispose it as mixed solid municipal waste,
but dispose it referring to a specific collection
centre located in your area or returning it to the
distributor
type to be used with the same functions.
This procedure of separated collection of
electric and electronic devices is carried out
forecasting a European environmental policy
aiming at safeguarding, pro
environment quality
effects on human health due t
hazardous substances in such equipment or to an
improper use of the same or of parts of the same.
Caution! The wrong disposal of electric and
electronic equipment may involve sanctions.
■ WARRANTY
This equipment is covered by a 2-year warranty
elapsing from the purchase date, which has to be
proven by means of the stamp or signature
of the dealer and by the fiscal paym
receipt that shall be kept enclosed to this
document. This warranty period complies with
the laws in force (Italian legislative decree No. 24
dated Feb. 02, 2002 and following “Consumers’
Act” Italian legislative decree No. 206 dated Sep.
03, 2005) and applies only in case the consumer
is a private entity
for domestic use; therefore, their use in public
businesses is forbidden.
The warranty covers only pro
is void, if the damage is caused by accidental
events, wrong use, negligence or improper use
of the product. Use the supplied accessories
only; the use of other accessories may lead to
warranty voidness. Do not open the equipme
for any reason whatsoever; in case of opening
or tampering of the equipment, warranty decays
definitively
Warranty does not apply to parts
and wear along the use, as well as to batteries,
when they are standard supplied.
Warranty decays after 2 years from the purchase
date. In this case, technical service inter
will be carried out against payment. Information
on technical service inter
terms or against payment, may be requested by
writing at info@laica.com.
Nothing shall be owed for the repairing or
replacement of products covered by the warranty
terms. In case of faults, refer to a dealer; DO NOT
send anything directly to LAICA.
All interventions covered by warranty (including
product replacement or the replacement of any
of its parts) shall not be mea
duration of the original warranty period of the
replaced product.
The manufacturer cannot be made liable for any
damages that may be caused, directly or indirectly
to people, things and pets resulting from the
inobservance of the provisions contained in the
suitable user manual, especially with reference
to the warnings related to installation, use and
maintenance of the equipment.
Being constantly involved in improving its own
products, Laica reserves the right to modify its
product, totally or partially
production need, without that this involves any
responsibility whatsoever by Laica or its dealers.
Instructions and warranty
English
GB
English
UL
GB
15
