Bedienungsanleitung Multiplex ROYALevo12 (Seite 21 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ROYAL evo

Page 76

SETUP (configuration (è 13.)

Transmitter

Mixer definiitions

Assignment

Training

Userr

CONTROL (è 14.)

Access to the individual set-up menus for the

transmitter controls. The screen only displays

those controls which are used in the current

model (=> dynamic menu).

MIXER (è 15.)

Access to the individual mixer menus. The

screen only displays those mixers which are

used in the current model (=> dynamic menu).

SERVO (è 16.)

Calibrate

Assignment

Monitor

Test run

TIMER (è 17.)

Model/memory operating time

Slot timer

Sum timer

Interval timer

MEMORY (è 18.)

Select or change model

Copy model

Erase model

Flight phase management

Model properties

Create new model

Press the corresponding direct menu access button to

call up a main menu.

(Example, switch language: L button)

The following display appears:

The first line indicates the main menu in which you are

currently located (example main menu Setup: „L

Setup“).

The second line always shows „¨ Exit“.More on this:

(è 10.3.4.).

The following lines list the associated sub-menus. Four

dots .... after the name of the sub-menu indicate that

additional menus (sub-menus) are present.

10.3.2. Opening sub-menus

You can now select one of the sub-menus line by line

using the UP/DOWN buttons (s / t)*), or alternatively

one of the two 3-D digi-adjustors. The selected line is

always highlighted (displayed in inverse video). This

corresponds approximately to the cursor of a PC.

(Example: language switch: sub-menu „ User “ )

To open a sub-menu press the “ENTER” button, or alter-

natively one of the two 3-D digi-adjustors.

The sub-menu opens.

To help you keep track of your movements, the first line

displays the symbol of the current main menu and the

name of the current sub-menu.

(Example language switch:

Main menu L Setup: sub-menu „ User “ )

Note:

If the area of the screen is not sufficient to list all the

left-hand edge of the screen. You can then “leaf

through” the list up or down using the UP/DOWN (s /

t) arrows, or alternatively one of the two 3-D digi-

adjustors, in order to reach the end or beginning of the

list. This is very similar to the process of “scrolling” in a

PC program. Example:

10.3.3. Changing values

Switching the display language is used as an example.

Starting from the status display you must proceed as

follows:

1. Press the L button

This opens the menu Setup. You can now select

the sub menu User using the UP/DOWN buttons

s t or alternatively one of the two 3-D digi-

adjustors. To move to the sub-menu press ENTER

(or).

2. Now select the parameter “Sprache” (German word

for language)with the UP/DOWN buttons s t (or

one of the 3-D digi adjustors).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info