Bedienungsanleitung Multiplex ROYALevo12 (Seite 22 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Instructions

Page 77

3. Press the ENTER button (or one of the 3-D digi

adjustors) to release the parameter for changing.

With the UP/DOWN buttons s t (or one of the 3-

D digi adjustors) you can now select one of the two

languages:

Your selection is confirmed by pressing ENTER (or

one of the 3-D digi adjustors) and you will leave

the parameter field.

Note on memorisation of modifications:

Modified values/settings are stored immediately in

the model memory. No manual storing procedure is

required.

' TIP !

Using the REV/CLR button

The value of a parameter can be changed using the

UP/DOWN (s t) buttons or one of the two 3-D digi-

adjustors, but in addition REV/CLR button can also be

used to reverse many values, or reset them to the de-

fault (standard) setting.

10.3.4. Returning from whence you came

When you quit the value/setting field the cursor moves

back to the last used parameter field.

To leave the sub-menus and main menus simply move

to the 2nd line „¨ Exit “ and then press the ENTER

(or one of the 3-D digi adjustors), until you return to the

status display.

Fig. 1 Fig. 2

' TIP !

Direct switching to other main menus

If you are in one menu and wish to move straight to

another main menu, you can do this directly by pressing

the relevant direct menu access button.

' TIP !

Back to the status display

Pressing any direct menu access button twice takes you

quickly and directly to the status display you last used

(provided that you are not currently located at a pa-

rameter value).

11. Digital trims

11.1. Introduction

The ROYALevo features modern digital trims for the 4

primary control axes (stick functions).

The trims of the ROYALevo operate on the “Centre Trim”

principle, i.e. trim corrections only affect the range a-

round the centre of the stick travel, and not the end-

points. The advantage compared with conventional

trims is that the full control travel (and thus servo travel)

remains available, so you do not need to provide a re-

serve for trimming.

Top

end-point

Standard trim

The diagram shows what happens when the stick is

moved to the right: the servo moves to the top end-

point before the stick reaches its end-point. This means:

dead zone at one extreme of stick travel.

When the stick is moved to the left, the servo fails to

reach the bottom full travel point. That means: full servo

travel is not available.

Centre trim

Both servo end-points are always reached, regardless of

the trim position.

' TIP !

Since the response curve of the transmitter control is

altered when you adjust the “Centre Trim”, it is impor-

tant that trim corrections should be relatively small. If

major corrections are required, always adjust the me-

chanical linkage!

11.2. Advantages of digital trims

Digital trims have two important advantages:

1. The trim buttons do not have a mechanical position

corresponding to the trim value (as is the case with

a conventional trim system with trim sliders). The

trim setting of the digital trim is displayed on the

screen, and the trim values are stored in the model

memory. If you change to a different model mem-

ory, the trim is immediately correct; you do not

have to move the trim slider to adjust the transmit-

ter to the new model.

2. The ROYALevo features flight phases, and each

phase features its own trim memory for models u-

sed with flight phases. Each flight phase can easily

be trimmed accurately and independently of the

other phases.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info