Bedienungsanleitung Olivetti LAB_S120 (Seite 31 von 64) (Englisch)

16706

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

- If the caller is a telephone, after two rings, the fax machine

emits an acoustic signal for about 20 seconds and the

display shows "LIFT HANDSET". If you do not lift the

receiver within 20 seconds, the fax machine automati-

cally prepares to receive a document.

If you lift the receiver before the fax machine connects to the

telephone line and you hear the dialling tone, proceed as

follows:

1. Press the key:

2. Hang up.

note

Any kind of reception may be stopped by pressing the key.

The fax machine then returns to its initial stand-by mode.

SET

ONE

TOUCH

AND

SPEED

DIALLING

The fax machine is also capable of carrying out quick dialling

procedures, such as one-touch dialling and speed dialling, but

these functions must be duly set.

ONE-TOUCH DIALLING

You can assign each of the 10 numeric keys (0 - 9) a fax

number or a telephone number and a name which will

be dialled automatically when you press this key for more

than a second.

1. Press the key

until the display shows:

FAX SET-UP

2. Press the key:

The display shows:

DATE AND TIME

3. Press the key

until the display shows:

ONE TOUCH DIAL

4. Press the key:

The display shows:

TYPE ONE TOUCH

KEY: 0-9

5. Press the numeric key to which you want to assign the

telephone number or the fax number (for example,

To do this, press the keys:

- The display shows:

1:TEL NO.

If a fax number or a telephone number has already been

saved, the display will show it.

6. Dial your correspondent’s telephone or fax number (max.

64 digits).

To do this, press the keys:

7. If there are any incorrect numbers, move the cursor on the

incorrect number.

To do this, press the keys:

8. Then overwrite the number with the correct one.

To do this, press the keys:

9. To delete the number completely, press the key:

10. If your fax machine is connected to a private line and you

have selected the "FLASH" dialling mode, access the pub-

lic line, before dialling the number, by pressing the key:

A letter "E" (external) appears on the display.

11. To confirm the setting, press the key:

The display shows:

1:NAME

If a name has already been saved, the display will show it.

12. Enter the correspondent's name (max. 16 characters) as

you did for your name (see "All that is missing now is

your name and fax number", chapter "How to get

started quickly").

To do this, press the keys:

13. If there are any incorrect characters, move the cursor on

the incorrect character.

To do this, press the keys:

14. Then overwrite the character with the correct one.

To do this, press the keys:

15. To delete the name completely, press the key:

16. To confirm the setting, press the key:

The display shows:

EDIT ANOTHER YES

At this point, you can abort the procedure or you can

program another one-touch dialling key.

17. To abort the procedure, press the key:

18. To set another one-touch dialling key, repeat the procedure

from the steps in which the correspondent’s number and

name are entered.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti LAB_S120 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti LAB_S120

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info