Bedienungsanleitung Satel CA-10 (Seite 10 von 43) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

8 Installer Manual SATEL

• the same zones are assigned to different partitions – these partitions will become

mutually internal; arming/disarming one partition causes identical reactions in the other

partition: thus defined partitions behave like one partition with two (or more)

independent keypads.

When analyzing, if the given partition is an internal one, the control panel checks how the

zones for which arming is possible overlap. Therefore, an internal partition can be assigned

with separate "24H" zones as well as arming control zones.

The partitions have individual identifiers and event codes for monitoring purposes.

Access codes and authority levels

The CA-10 panel can store in memory 32 access codes (4 to 6 digits long), with different

authority levels. The codes are associated with the partitions they are assigned to. The each

partition has a master code. The master code cannot be deleted, however it can be changed.

It provides access to all user functions.

The master code user (user number 0) can add new users to partition, assigning various

authority levels to them. The code authority level defines which functions of the control panel

are accessible by using this code, and which are not.

New users (new codes) are automatically numbered by the control panel as they are entered.

This makes it possible to distinguish, who and when operated the control panel, as the user

(code) number is stored in the memory of events along with the command given. With the

LCD keypad, identification of the users by their name is also possible.

Deletion of the code will not cause renumbering of the other users’ access codes. Whenever

a new user is added, his code will replace the one left by the deleted user.

Access codes can be declared as the „global access codes” (FS131). Then they will be

accepted in each partition, irrespective of in which partition they are entered. However, with

this option it is impossible to identify the user who called the control function when viewing

the event log.

Note: Creating inner partitions in the system, with the option of global access codes on,

enables the basic partition to be controlled with the master codes of these partitions.

If these codes are not used, they should be changed for the safety reasons.

Individual users may have the following authority levels:

1 – accessible all functions, except creating and deleting users,

2 – accessible arming and disarming, change of access code,

3 – accessible arming, while disarming is only possible when the system was armed

with the same access code,

4 – code trap: it arms and disarms the system, but disarming sends a DURESS

("disarmed under duress") message to the monitoring station,

5 – activates the MONO SWITCH output, its use is recorded in the event log, can serve

as a guard code,

6 – changes the state of BI SWITCH output,

7 – partial arming – the code arms the system, simultaneously bypassing a group of

zones (specified by the installer in service functions), otherwise the code provides the

same features as that with authority level 2,

8 – accessible arming and disarming, without possibility to change own access

code,

9 – accessible arming only,

0 – accessible alarm clearing only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info