Bedienungsanleitung Satel CA-10 (Seite 11 von 43) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

CA-10 Installer Manual 9

Keypads

The keypads are designed for operating and programming the system (or a partition).

The CA-10 can support four independent LCD or LED keypads, thus making possible

creation of four partitions or separate systems. Each keypad is assigned to one partition.

The keypad operating mode is set when programming the panel. It is possible to disable

some of its functions (e.g. the quick arming by pressing in turn the [0] and [#] keys), and

determine what audible signals are to be provided by the keypad.

The keypads have an individual addresses, which make difficult replacement or connection of

another keypad, an individual tamper contact and two zones, which operate identically as the

zones of the control panel main board. The keypad zones can be assigned to any partition.

The data concerning the address, tamper contact status and zone status, are sent to the

control panel together with keypad data.

LED Keypad

There are two types of LED keypads available to interface with the CA-10 panel, which

have the following designations: CA-10 KLED and CA-10 KLED-S.

In LED keypads the status of partitions and zones is indicated by means of LEDs

(the CA-10 KLED keypad can display the status of up to 12 zones). Additionally, three

LEDs provide information on the system status: the red LED indicates ALARM,

the green one – ARMED (blinking means countdown of the exit delay), and the yellow

one – TROUBLE.

For details regarding the keypad indication see the CA-10 User Manual.

LCD Keypad

There are three types of LCD keypads available (to interface with the CA-10 panel), which

have the following designations: CA-10 KLCD, CA-10 KLCD-L and CA-10 KLCD-S.

The CA-10 control panel in version 5.11 supports the keypads with program version v3.12

(or later).

The LCD keypad provides information on the alarm system status by means of a two-line

(2 x 16 characters) LCD display and, additionally, six LEDs. The LED functions are

described in the CA-10 User Manual.

The keypad is provided with 12 keys, designated according to the telephone standard, and

intended for entering data. The additional 4 arrow keys in the LCD keypad allow the user

to move through the MENU and to select functions.

Three operating modes of the keypad are provided:

1) Text mode. The first line of the display shows the system date and time. The second

line contains messages on the system state. The contents of messages can be either

standard (e.g. SYSTEM OK., ARMED), or customized by the installer. This mode

enables the status to be displayed either with or without priority. In the priority mode,

the most important information message from among a few relevant ones

(e.g. ALARM!) will be constantly on. In the non-priority mode, the display state will

change cyclically (e.g. the messages THERE WAS ALARM and ARMED will be

displayed alternately).

2) Zone state display – LCD standard. The first line of the display shows the system

date and time, while the second serves for monitoring the state of all the 16 zones of

the control panel. The zone state is determined by a displayed character (for example:

 = zone OK.,  = zone violated). At the moment of changing the system state (e.g.

when the system is armed), the display shows the status for a while, much in the same

way as in the previous mode, then the keypad returns to monitoring the state of zones.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info