699577
13
Zoom out
Zoom in
Vorherige Seite
1/43
Nächste Seite
CA-10 Installer Manual 11
define how the events are to be sorted between the two stations. Information can be sent to
the stations in one of the seventeen transmission formats (including the TELIM format, used
in Germany).
Because of the analysis of commutation signals (algorithm ToneLOGIC), the CA-10 panel
controls the process of establishing connection with the station, which in case of the line
being frequently busy considerably reduces the time between occurrence of the event and
sending information to the monitoring station. As dialing retries are made immediately after
detecting the busy signal, the connection is established many times faster than with the
equipment which waits for one specific signal for a predetermined period of time and only
redials upon detecting that that signal has not occurred.
Dialer
The CA-10 control panel is equipped with a telephone dialer, which enables an alarm voice
message to be transmitted. The message is stored in an external synthesizer. The control
panel directly interfaces with the SM-2 voice synthesizer.
The dialer can also establish connections with paging systems. Four different alphanumeric
messages can be programmed.
The CA-10 allows programming of eight telephone numbers, 16 characters each.
It is possible to define for each number, which partitions signal alarm at that number and
assign to it one of the four text messages for the pager or a voice announcement from the
synthesizer.
During the procedure of connection setup, the ToneLOGIC system used in the CA-10 panel
controls sound signals from the telephone line. Hence, it can recognize that the call is
answered, irrespective of the type of telephone exchange.
Messaging for each telephone number is realized in accordance with the following
parameters:
number of queues (1 to 7) defines how many times it is necessary to call and send
information to each number,
maximum number of retries (1–9) number of attempts, after which the panel will stop
dialing the number, for which connection cannot be established (no answer, permanently
busy, etc.).
When waiting for the dial tone during dialing (code D, when the control panel is connected to
an extension line and is trying to get the outside line), detecting the busy signal does not
decrease the counter of queues and attempts.
The control panel dialer can also perform the function of answering the calls and
reporting the system state (service functions FS5 and FS101):
with a sound signal: one beep a second if there was no alarm,
with a voice message (if one hour has not elapsed yet after the alarm),
with a sound signal: five short beeps every second if at least one hour has elapsed from
the alarm.
Another way of getting information on the system state via the telephone is through the
control panel operation in conjunction with the SATEL MST-1 module (service function
FS131). Additionally, this module enables the system to be remotely controlled, within certain
limits, by means of DTMF signals. For the connection diagram refer to the MST-1 module
operating instructions.
Remote programming – DOWNLOADING
In order to facilitate programming, the CA-10 panel is equipped with a DOWNLOADING
function, which enables a PC computer to be used for programming and service control of
the alarm system.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel CA-10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel CA-10

Satel CA-10 Bedienungsanleitung - Deutsch - 2 seiten

Satel CA-10 Bedienungsanleitung - Deutsch - 4 seiten

Satel CA-10 Zusatzinformation - Deutsch - 64 seiten

Satel CA-10 Zusatzinformation - Deutsch - 24 seiten

Satel CA-10 Bedienungsanleitung - Deutsch - 26 seiten

Satel CA-10 Installationsanweisung - Deutsch - 44 seiten

Satel CA-10 Bedienungsanleitung - Englisch - 2 seiten

Satel CA-10 Bedienungsanleitung - Englisch - 2 seiten

Satel CA-10 Bedienungsanleitung - Englisch - 2 seiten

Satel CA-10 Zusatzinformation - Englisch - 60 seiten

Satel CA-10 Zusatzinformation - Englisch - 24 seiten

Satel CA-10 Bedienungsanleitung - Englisch - 24 seiten

Satel CA-10 Kurzanleitung - Englisch - 11 seiten

Satel CA-10 Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info