Bedienungsanleitung Satel CA-6 (Seite 10 von 36) (Englisch)

699578

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

8 SATEL Installer Manual

Fig. 1. View of the CA-6 KLED keypad.

The partitions have individual identifiers and event codes for the monitoring purposes.

Access codes and authority levels

The CA-6 control panel can store in memory 13 access codes (4 to 6 digit long), with

different authority levels. The codes are associated with the partitions they are assigned to.

The control panel has a MASTER code – by default [1][2][3][4]. The master code cannot be

deleted, however it can be changed. It provides access to all user functions.

The master code user (User 0) can add new users, assigning various authority levels to them

and determining which partition is controlled by the code. The code can be assigned to one

partition or to both of them. Thus, both partitions can be armed with a single code. The code

authority level defines which functions of the control panel are accessible by using this code,

and which are not.

New users (new codes) are automatically numbered by the control panel as they are entered.

This makes it possible to distinguish, who and when operated the control panel, as the user

(code) number is stored in the memory of events along with the command given.

Deletion of the code will not cause renumbering of the other users’ access codes. Whenever

a new user is added, his code will replace the one left by the deleted user.

Individual users may have the following authority levels:

1 – accessible all functions, except creating and deleting users,

2 – accessible arming and disarming, change of access code,

3 – accessible arming, while disarming is only possible when the system was armed

with the same access code,

4 – code trap: it arms and disarms the system, but disarming sends a DURESS

("disarmed under duress") message to the monitoring station,

5 – activates the MONO SWITCH output, its use is recorded in the event memory, can

serve as a guard code,

6 – changes the state of BI SWITCH output,

7 – partial arming – the code arms the system, simultaneously bypassing a group of

zones (specified by the installer in service functions), otherwise the code provides the

same features as that with authority level 2,

8 – accessible arming and disarming, without possibility to change own access

code,

9 – accessible arming only,

0 – accessible alarm clearing only, the code does not arm/disarm the system.

Keypads

Two modifications of LED keypads are manufactured, intended to work together with

the CA-6 control panel and designated

CA-6 KLED and CA-6 KLED-S. Up to mid-

2006, the CA-6 KLED-M keypad was also

made.

The keypads are designed for operating

and programming the system

(or a partition). The keypad operating

mode is set when programming the

control panel. It is possible to disable

some of functions (e.g. the quick arming

by pressing the [0] and [#] keys), and

determine what audible signals are to be

provided by the keypad.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-6 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info